Niles ZR-6 Installation Manual page 41

SYSTEM CONFIGURATION
CONFIGURING THE ZR-6 MULTIZONE RECEIVER
To change these outputs to a fi xed volume level, press the Band
button. The display will show [PRE-OUT 6 FIXED]. The Zone 6
Output is now set to +6dB relative to the selected source input level.
Z O N E 6
F I X E D
To continue to NAMING THE SOURCE DEVICES, press the Set
button once.
To save the settings and exit the confi guration mode, simultaneously
hold down the Band and Set buttons. After the ZR-6 saves the
information, [RELEASE BUTTONS TO CONTINUE] appears on the
display. The ZR-6 will return to the normal operating mode.
NAMING THE SOURCE DEVICES
While in the confi guration mode, press the Set button until the
display shows [SRC NAME]. Press the Set button to highlight
a source number. The numbers indicate the six sources of the
ZR-6 MultiZone Receiver. You cannot re-name Source 1 because it
is always the built-in AM/FM tuner. The default name for Source 2
is iPod.
3 4 5 6
I P O D
If an iPod will not be used with the system, select a name for
the source device 2. If iPod remains as the Source 2 name
and no iPod is connected, whenever Source 2 is chosen [IPOD
DISCONNECTED] will appear on the screen.
With a source number highlighted, toggle through the available
source device names by pressing the + and – buttons.
2 4 5 6
S A T
The source device name that is selected is the name that will
appear on the LCD displays of Solo-6MD Master Keypads whenever
that source is selected and on the source keys of a
TS-Pro. There are 35 source device names available. They appear
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
P R E O U T
S R C N A M E
S R C N A M E
R A D I O
in alphabetical order, except N/A which appears fi rst, and iPod
which appears fi rst for Source 2 only.
Available source device names:
Radio (default Source 1)
• N/A • CD Ch 3
• Blu-ray • DMS
• Cable • DMS 2
• Cable 2 • DMS 3
• Cable 3 • DMS 4
• CD • DVD
• CD 2 • DVD 2
• CD 3 • DVD Ch
• CD Ch • DVD Ch 2
• DVR
• CD Ch 2
The corresponding Solo-6MD Master Keypad screen displays and
the TS-Pro device screens are shown in an appendix at the end of
this document.
To continue to the next confi guration step, ERASING TUNER PRESET
INFORMATION, press the Set button.
To save the settings and exit confi guration mode, simultaneously
hold down the Band and Set buttons. After the ZR-6 saves the
information, [RELEASE BUTTONS TO CONTINUE] appears on the
display. The ZR-6 will return to the normal operating mode.
ERASING TUNER PRESET INFORMATION
While in confi guration mode, press the Set button until the display
shows [ERASE PRESETS?]
E R A S E P R E S E T S ?
- / N O + / Y E S
Press + to erase all 20 tuner presets stored into the ZR-6. The
display will show [PRESETS ERASED].
P R E S E T S
iPod (default Source 2)
• HDTV • SAT TV 3
• MP3 • TV
• Music • TV 2
• Music 2 • Video
• PC • Video 2
• SAT Radio • Game
• SAT Radio 2
• SAT Radio 3
• SAT TV
• SAT TV 2
E R A S E D
39