Niles ZR-6 Installation Manual page 79

RS-232 CONTROL PROTOCOLS
CONTROL COMMAND STRINGS
r[type],[com #],FAIL,[fcode][cr]
ZR-6 Response:
r
indicates a ZR-6 command response
[type]
identifies the response type
znc
= zone command
znt
= zone transport command
src
= source command
srt
= source transport command
spc
= special command
syc
= system command
zsc
= zone specific command
[com #],
the number of the failed command (see table)
FAIL,
indication the command failed
[fcode]
code number of the failure type:
1
Cannot allocate memory to process message
2
Invalid Command
3
Incomplete message: missing command
4
Incomplete message: missing parameter
5
Cannot allocate memory to process command
6
Cannot change the zone: invalid zone number
7
Invalid key code (command type)
8
Is not allowed hold flag
9
Is not allowed repeat flag
10
Invalid flag
11
Is not allowed flags
12
Cannot find the zone: invalid index
13
Cannot find the source: invalid index
14
Cannot find the soft key: invalid index
15
Cannot find the menu item: invalid index
16
IP address is not defined
17
Alternative behavior is not supported
18
ZR-6 is waiting previous special command answer
19
ZR-6 is waiting previous special command setting
answer
20
Parameter 1 is out of range
21
Parameter 2 is out of range
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
22
Parameter 3 is out of range
23
Parameter 4 is out of range
24
Invalid parameter: too many dots
25
Invalid parameter: must be all numbers
26
Menu is not available
27
Pound (#) or bytes do not match with the string
value bytes that were received
28 Menu does not support alphanumeric search
[cr]
is a carriage return
8) Erase EEPROM – erases all confi guration input and tuner
presets, restoring the ZR-6 to the factory default condition.
NOTE: LEARNED IR COMMANDS ARE NOT ERASED.
syc,3,[cr]
Syntax:
syc,
indicates the command type (system command)
3,
indicates this is an EEPROM erase command
[cr]
is a carriage return
EXAMPLE :
syc,3,[cr]
Command: (erases the EEPROM)
rsyc,3,[cr]
ZR-6 Response: (EEPROM has been erased)
rsyc,
identifies a response to a system command
3,
indicates the EEPROM was erased
[cr]
is a carriage return
(CONTINUED ON NEXT PAGE)
77