Rotisserie; Stainless Steel - GE Monogram ZGG24L20 Owner's Manual

Stainless
Do not use a steel-wool pad; it will scratch the
steel surface.
surfaces
To clean the stainless steel surface, use
warm sudsy water or a stainless steel cleaner or
(on some models)
polish. Always wipe the surface in the direction
of the grain. Follow the cleaner instructions
for cleaning the stainless steel surface.

Rotisserie

Keep the rotisserie motor electric cord away
from the heated surface of the grill. When not
in use remove and store the motor in a dry
location.
Burner
Clean the exterior of the burner(s) with a
cleaning wire brush.
Be sure burner ports are clear and free from
debris. Clear any clogged ports with a
straightened paper clip. Never use a wooden
toothpick as it may break off and clog the port.
Never enlarge the burner ports. Shake out any
debris through the air shutter.
Use a flashlight to inspect the burner inlet to
ensure it is not blocked. If obstructions can be
seen, use a metal wire coat hanger that has
been straightened out to clear them.
NOTE: To ensure warranty coverage and proper
performance of the grill and range-top burners,
monthly inspection and cleaning of all the grill
and range-top burner orifices is recommended.
Orifice
With the burner(s) removed, remove the
cleaning orifice and shine a flashlight through the
opening to ensure there is no blockage.
Control
Clean up spatters with a damp cloth. Remove
panel and heavier soil with warm, soapy water.
knobs
Do not use abrasives of any kind on the control
panel.
The control knobs may be removed for easier
cleaning. To remove a knob, pull it straight off
the stem. Wash the knobs in soap and water but
do not soak.
26
Care and Cleaning
Stainless Steel Outdoor Cooking Center
To inquire about purchasing stainless steel
appliance cleaner or polish, or to find the
location of a dealer nearest you, please call our
toll-free number, 800.626.2002 or visit ge.com.
In Canada, call 1.800.661.1616 or visit
www.GEAppliances.ca.
Clean the skewer in warm sudsy water.
Grill burner for 27" , 36" and 48" models
Grill burners for 24" model
Use a needle to clear any debris. Be extremely
careful not to enlarge the hole or break off
the needle.