Connecting An Audio Device Or Mobile Phone To The Control Unit - Sennheiser S1 PASSIVE Instruction Manual

Putting the S1 PASSIVE into operation
Type of use
Muting
If the battery capacity is low, the headset automatically switches off to protect
the batteries/rechargeable batteries from total discharge and leakage.
Replace the batteries or recharge the rechargeable batteries.

Connecting an audio device or mobile phone to the control unit

The control unit's 3.5 mm jack socket allows you to connect an audio device or
mobile telephone. For this purpose, the Power
position ON.
Use the volume control to adjust the volume of the connected device (see
page 13). However, other functions cannot be controlled via the control unit.
Operate your connected device as usual and observe the manufacturers
instructions.
Connecting OMTP compatible mobile phones and audio devices
Use the supplied audio cable when connecting mobile phones from LG
®
Samsung and Sony Ericsson
8 | S1 PASSIVE
Type
Alkaline batteries/
rechargeable batteries
Lithium batteries
®
and audio devices.
Operating time
approx. 200 hrs
approx. 220 hrs
OFF/ON switch must be set to the
® ®
, Nokia ,
ON