Connecting The Mm 400-X To The Audio Source - Sennheiser MM 400-X Instruction Manual

Putting the MM 400-X into operation

Connecting the MM 400-X to the audio source

CAUTION
Danger of malfunction due to radio waves!
The transmitted radio waves of mobile phones can impair the operation of
sensitive and unprotected devices.
Only use the headset in environments where wirless Bluetooth trans-
mission is permitted.
The headset complies with the Bluetooth 2.1 standard. In order that data
can be transmitted wirelessly using Bluetooth technology, you have to
register your headset with your audio source (pairing).
The headset can save the connection profiles of up to 8 Bluetooth devices
with which it has been paired. After switch-on, the headset automatically
connects to one of these devices.
If you pair the headset with a ninth audio source, the saved connection
profile of the first Bluetooth device will be overwritten. If you want to re-
establish a connection with the first audio source, you have to pair the
headset with this audio source again.
If your audio source does not have a Bluetooth interface, use an
optional dongle.
BTD 500 USB
For an optimum listening experience, your audio source has to
support the A2DP profile.
BTD 300i
MM 400-X | 11