Using The Whirlpool Function - Invacare TheraPure 3752G User Manual

5 OPERATING INSTRUCTIONS
 Refer to the following chart for shower head adjustment settings.
Stream
 Flow Control serves as a volume control and water saver.
The use of the Flow Control permits the reduction of water flow without the need for readjustment of water temperature during bathing.
A trickle of water through the Flow Control when in the closed position is normal.
5.8

Using the Whirlpool Function

1. If the water level does not cover the whirlpool jets, push the tub fill button to auto-fill the tub.
2. After the water level covers the whirlpool jets and after bathing the resident, add Invacare Defoamer to the bath water. Refer to the Defoamer
bottle for directions.
3. Push the whirlpool button to start whirlpool jets. After use, press the whirlpool button again to stop the whirlpool jets.
4. Drain the tub completely.
5. Transfer the resident from the tub.
6. Clean and disinfect the tub, including the door seal. Refer to Cleaning and Disinfecting on page 21.
Invacare® TheraPure™ Recessed Whirlpool Tubs
Pulse Massage Shower Spray
30
Mixture of Shower Spray and Pulse Massage
Part No. 1167458