Table of Contents
Advertisement
Lighting the THELIA 23 and THELIA SB 23 boilers
1 - Push in and hold
1 / ON
3 - Wait for
20 seconds
+
Note : On pressing the 'ON' button, the fan will be heard
to run at full speed after which the ignition sequence will
start and the pilot will light.
Should the pilot fail to remain alight or go out for any
reason, intentionally or unintentionally, always wait at
least 3 minutes before trying to relight.
Lighting the THELIA 23 E boiler
Push in and release
1 / ON
Diagram. 2
6
bar
Diagram. 3
6
bar
4
2 - The pilot lights.
Check that pilot
is alight by look-
ing through the
viewing window.
4 - Release : the
pilot must remain
ON, if the pilot
does not remain
lit, repeat the
previous steps.
1 / ON
BOILER CONTROL PANEL THELIA 23, THELIA 23 E
5
7
4
3
2
1
30
110
0
BOILER CONTROL PANEL THELIA SB 23
7
5
4
3
2
30
110
1
0
CONTROLS AND LIGHTING
Diagram. 1
OPENING THE CONTROL PANEL COVER
The control panel, located at the lower front of the
boiler casing diag. 1 allows the boiler to be started,
shut down, controlled and monitored during use.
Control panel description (diag. 2 and 3) :
1 - "ON" push - button.
2 - "OFF" push - button.
4 - Boiler thermostat.
5 - Temperature gauge.
6 - Pressure gauge.
7 - Summer - Winter lever (THELIA 23, THELIA 23 E).
Summer - Winter switch (THELIA SB 23).
30 - Domestic hot water temperature
adjustment.
4
30
4
2
2
1
0 / OFF
1 / ON
1
0 / OFF
1 / ON
Hide quick links:
Advertisement
Table of Contents
