Installing The Va-Sw3050 Software - Sanyo VA-SW3050 Instruction Manual

Installing the VA-SW3050 Software

Start the installation program, and use the interactive dialog boxes to advance the installation.
1
Set the supplied installation CD-ROM
into the drive.
The installation program starts
automatically.
Note:
If the VA-SW3050LITE, which is supplied
with the VA-50LAN option board, already
has been installed on your PC, uninstall the
VA-SW3050LITE before installing the
VA-SW3050.
2
In the [Welcome to the VA-SW3050 Setup
Wizard] dialog, click [Next].
The setup wizard for the VA-SW3050 starts.
3
In the [License Agreement] dialog, select
the [I accept the agreement] option and
click [Next].
Be sure to read the license agreement
thoroughly before proceeding the
installation.
English
4
In the [License information] dialog, enter
the serial number and click [Next].
The serial number is shown on the
envelope containing the installation
CD-ROM.
Example: 1234-5678-9012-3456
5
In the [Select Destination Location]
dialog, click [Next].
If you want to change the install destination
folder, click [Browse] to select the desired
folder.
6
In the [Select Start Menu Folder] dialog,
click [Next].
If you want to change the Start menu folder,
type the new folder name into the box, or
select the desired folder from the existing
folder list.
3