GE JGBP25GEN Use And Care & Installation Manual page 46

HOW TO COHVE~ THE RANGE FOR USE
Turn all top
1.
burners to ~W.
2. Remove all
four knobs.
3. With a small flat
blade screwdriver, turn
the valve set screws
clockwise to decrease
flame size, counterclockwise
increase flame size. Adjust
to
until the flame is about the same
height as the top of the burner.
4. Replace knobs.
5. Check for flame outage by opening and
closing the oven door several times. If the flame
goes out, increase the flame size.
46
(continued)
(continued)
\
CHECK QUALITY OF FLMES
The combustion quality of burner flames needs
to be determined visually.
Normal burner flames should look like
(C),
depending on the type of gas you use.
With LP gas, some yellow tipping on outer cones
is normal.
(A),
call for service.
(B) or
(B) Yellow tips on
outer cones—
Normal for LP gas