DAVIS Vantage Pro2 Manual page 6

Install the Data Logger
3. Carefully insert the data logger (Serial, USB or IP) into the connector slot,
making sure to push the data logger firmly into place.
Serial
Data Logger
Data Logger
Cable Channel
4. Rejoin the case halves, making sure the data logger cable passes through the
cable channel.
5. Fasten using the three screws you removed in step 1.
4
WeatherLinkIP
Data Logger
Data Logger
Cable Channel
Inserting the Serial, USB or IP data logger into the Envoy
USB
Data Logger
Data Logger
Cable Channel