Advertisement
CONNECTIONS
Connection for Monitoring
BNC type
Cable type
RG-59U (3C-2V)
RG-6U (5C-2V)
RG-11U (7C-2V)
• When using an RG-59U (3C-2V) cable, do not let it dangle in the air
or attach it to piping.
• If you use a cable other than the types above, the image or sync
signal will be attenuated and will not be transmitted correctly.
■ Using a Camera Control Unit
When using menus, connect a camera control unit (VAC-70: Separately
ordered) because menu settings can be carried out without removing the
dome cover.
BNC type
Note: Make sure to disconnect the unit after setting or adjustment is
completed.
Printed on recycled paper
1AC6P1P3026--
L5BK2/US, XE (0206KP-SY)
Base plate
Length
250 m max.
500 m max.
600 m max.
VAC-70
RG-6U (5C-2V) cable,
500 m max.
Do not connect the power cord until all other
connections have been completed.
Connection for Power Supply
AC 24 V connection
GND
~
~
18 AWG or more
DC 12 V connection
Check that polarity is correct.
–
+
18 AWG or more
Connection for Alarm Input
Refer to the instruction manual for the connected alarm
device for further details.
External Alarm
Input Signal
Connection for Zoom Input
It is used to make wide angle/telescoping adjustments.
Zoom Input Signal
TELE
WIDE
■ To prevent electromagnetic interference
Be sure to attach the supplied clamping core to the cables
as illustrated.
• On the cable for power supply
CAT5 (+)
CAT5 (-)
485 (A)
485 (B)
GND
Alarm
WIDE
device
TELE
AL IN
NC
CAT5 (+)
CAT5 (-)
485 (A)
485 (B)
GND
WIDE
TELE
AL IN
NC
Printed in Japan
Advertisement
