Assembly - Reebok Rt1000 User Manual

A
SSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver
1. With the help of a second person, carefully raise the
treadmill to the upright position.
Whilst a second person tips the treadmill to one side
and holds it, insert one of the Extension Legs (103) into
the treadmill as shown. Make sure that the Extension
Leg is turned so the Caution Decal (not shown) is on
top. Next, tip the treadmill to the other side and attach
the other Extension Leg in the same way.
With the help of a second person, lower the treadmill so
that both Extension Legs (103) are resting on the floor.
2. Remove the Lock Knob (80) from the Lock Pin (73).
Make sure that the Lock Pin Collar (119) and the Spring
(56) are on the Lock Pin (73). Insert the Lock Pin into
the Lock Knob Sleeve (118) on the left Upright (82).
Tighten the Lock Knob (80) onto the Lock Pin.
3. Insert one of the Handrails (74) fully into the tube at the
top of the right Upright (82). To make insertion easier,
pivot the Handrail back and forth, as shown, as you in-
sert it into the tube.
Next, align the lower end of the Handrail with the corre-
sponding hole in the base of the right Upright (82). Be
careful not to scratch the paint.
Insert the other Handrail (74) into the tube on the left
Upright (82) in the same way.
6
.
1
2
80
118
3
74
56
119
82
82
74
103
73
82