troubleshooting
Nothing happens when
operating remote.
Red indicator light not
blinking when pressing
buttons.
Remote will not operate my
devices.
Nothing happens when
operating ceiling fan.
POWER button does not
turn on device.
INPUT button does not
function.
SELECT button does not
function.
20
1. Make sure batteries are properly installed.
2. Replace with 4 new AA batteries.
1. Make sure batteries are properly installed.
2. Replace with 4 new AA batteries.
1. Try all codes listed for your device brand.
2. Use the searching for your device code method
on page 6.
1. Make sure dip switchs in both the transmitter and
receiver are set to the same code.
2. Make sure ceiling fan is initially set on high speed.
1. Try pressing the device button.
2. Try all codes listed for your device brand.
3. Use the searching for your device code method
on page 6.
1. Try entering "00" for the TV channel number.
2. Refer to your television owner's manual for similar
suggestions.
3. Use the searching for your device code method
on page 6.
1. Try the ENTER button.
2. Try all codes listed for your device brand.
3. Use the searching for your device code method
on page 6.
41536-01 1/25/2002