Displaying Certain Poi On The Map; Registering/Deleting Poi Shortcuts; Registering A Poi Shortcut - Pioneer AVIC-X3 Operation Manual

MAN-AVIC-X3-EN.book Page 47 Wednesday, June 6, 2007 10:15 AM
Displaying Certain POI on the
Map
POI in a certain category can be shown on the
map, and you can check the location on the dis-
play.
1
Touch "Traffic/Info" in the NAVI MENU,
then touch "Overlay POI".
2
Touch the category you want to display.
The selected item is marked. If you want to
select other categories, repeat this step.
If you want to display more detailed cate-
gories, touch . When the subcategory
list appears, touch the item you want to
display and touch "Back".
When some sub-categories are selected,
the corresponding category is marked
blue. When all the sub-categories within a
category are selected, that category is
marked red.
You can use up to 100 categories of the
detailed categories for "Vicinity Search".
If you touch one of the POI shortcuts (e.g.
), you can start searching for POI
directly in the selected category on the POI
shortcut.
3
Press the "MAP" button.
POI's in the selected category appear on the
map.
You can also display POI by using the
shortcut menu if "Overlay POI" is
selected on the "Short-Cut Selection".
Registering/deleting POI Short-
cuts
You can register up to six shortcuts to your
favourite POI. You can also change or delete the
registered shortcuts.

Registering a POI shortcut

1
Touch "Destination" in the NAVI MENU,
and then touch "Vicinity Search".
2
Touch "Set".
Displays a list of already registered POI short-
cuts.
3
Touch "Add".
Displays a POI category list.
4
Touch category or .
Touching a category adds that category to the
shortcuts. After touching
to Step 5 and select a subcategory.
5
Touch subcategory.
The selected category is added to the list of
POI.
When registering another icon, repeat steps 3
through 5.
, please proceed
47