Customising The Av Source Setting; Audio Adjustments; Introduction To Audio Adjustments; Using The Equaliser - Pioneer AVIC-X3 Operation Manual

MAN-AVIC-X3-EN.book Page 107 Wednesday, June 6, 2007 10:15 AM

Customising the AV Source Setting

Various settings are available with the audio
source according to your audiovisual requests.
This chapter describes the methods of changing
the various settings and how to set of the LCD
panel.

Audio Adjustments

Introduction to audio adjust-
ments
(1)
(1) Sound display
How to display the Sound menu
Only when the subwoofer controller setting is
Preout Full, Non Fading will be displayed
instead of Sub Woofer.
"Setting the rear output and subwoofer con-
troller" Page 113
When selecting the FM tuner as the source,
you cannot switch to "SLA".

Using the equaliser

The equaliser lets you adjust the equalisation to
match vehicle interior acoustic characteristics as
desired.
Recalling equaliser curves
There are seven stored equaliser curves which
you can easily recall at any time. Here is a list of
the equaliser curves:
Equaliser curve
S.Bass
S.Bass is a curve in which only low-pitched sound is
boosted.
Powerful
Powerful is a curve in which low-pitched and high-
pitched sounds are boosted.
Natural
Natural is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
Vocal
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat
Flat is a flat curve in which nothing is boosted.
Custom1
Custom1 is an adjusted equaliser curve that you cre-
ate.
Custom2
Custom2 is an adjusted equaliser curve that you cre-
ate.
1
Touch "EQ Menu" in the Sound menu.
2
Select the desired equaliser curve.
Page 69
Custom1 and Custom2 are adjusted
equaliser curves.
When Flat is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between
Flat and a set equaliser curve.

Using balance adjustment

You can select a fader/balance setting that pro-
vides an ideal listening environment in all occu-
pied seats.
1
Touch "FAD/BAL" in the Sound menu.
When the rear output setting is Rear SP
Sub. W, Balance will be displayed instead of
FAD/BAL.
"Setting the rear output and subwoofer
controller"
Chapter 8
Page 113
107