When Connecting To Separately Sold Power Amp - Pioneer AVH-P8400BT Owner's Manual

Section
15 Installation

When connecting to separately sold power amp

Rear output
Subwoofer
output
Blue/white (5*)
The pin position of the ISO connector will differ
depending on the type of vehicle. Connect 5*
and 6* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 5* and 6*.
•When you connect the separately sold
multi-channel processor (e.g.,
DEQ-P6600) to this unit, do not connect
anything to the speaker leads and system
remote control (blue/white).
•When you connect the multi-channel
processor to this unit, refer to
multi-channel processor's installation
manual for the connection method.
Perform these connections when
using the optional amplifier.
84
En
Front output
To front output
To rear output
To subwoofer
This product
output
Blue/white
Connect to system control
terminal of the power amp
(max. 300 mA 12 V DC).
Blue/white (6*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
Connect with RCA cables
(sold separately)
System remote control
Left

Subwoofer


Rear speaker


Front speaker

Power amp
(sold separately)
Power amp
(sold separately)
Power amp
(sold separately)
Right

Subwoofer


Rear speaker


Front speaker
