Table of Contents
Advertisement
Initial Settings
3
Press MULTI-CONTROL to turn Auto PI
seek on.
# To turn Auto PI seek off, press
MULTI-CONTROL again.
Switching the warning tone
If the front panel is not detached from the
head unit within four seconds of turning off
the ignition, a warning tone sounds. You can
turn off the warning tone.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 49.
2
Use MULTI-CONTROL to select
Warning tone in the initial setting menu.
3
Press MULTI-CONTROL to turn warning
tone on.
# To turn warning tone off, press
MULTI-CONTROL again.
Switching the auxiliary setting
Auxiliary devices connected to this unit can be
activated individually. Set each AUX source to
ON when using. For more information about
connecting or using auxiliary devices, refer to
Using the AUX source on page 55.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 49.
2
Use MULTI-CONTROL to select AUX1/
AUX2.
3
Press MULTI-CONTROL to turn AUX1/
AUX2 on.
# To turn AUX off, press MULTI-CONTROL
again.
List TTS (Text to speech)
Playback
TTS playback can be performed for an item se-
lected with the cursor in a list. If this is set to
on, any item the cursor is on for 2 seconds or
longer is read out.
! This function is available for the name in
the following lists:
— Phone book (phone book)
— Missed calls (missed call history)
— Dialed calls (dialed call history)
— Received calls (received call history)
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 49.
2
Use MULTI-CONTROL to select
List guidance.
3
Press MULTI-CONTROL to turn
List guidance on.
# To turn this function off, press
MULTI-CONTROL again.
# If the language is set to РУССКИЙ in the
Language select, this function cannot be
performed.
Switching the dimmer setting
To prevent the display from being too bright at
night, the display is automatically dimmed
when the car's headlights are turned on. You
can turn the dimmer on or off.
1
Display the initial setting menu.
Refer to Adjusting initial settings on page 49.
2
Use MULTI-CONTROL to select Dimmer
in the initial setting menu.
3
Press MULTI-CONTROL to turn dimmer
on.
# To turn dimmer off, press MULTI-CONTROL
again.
Section
11
51
En
Hide quick links:
Advertisement
Table of Contents
