Using The Phone Number List; Calling A Number In The Phone Book - Pioneer DEH-P8100BT Operation Manual

Using Bluetooth wireless technology
% End all calls
Press PHONE/ /BT MENU.
# You can also end all calls by pressing
CANCEL on the remote control.
% Switch between callers on hold
Press MULTI-CONTROL.
# You can also switch between callers on hold
by pressing a on the remote control.
% Rejecting call waiting
Press PHONE/ /BT MENU.
# You can also reject call waiting by pressing
/CANCEL on the remote control.
Notes
! To end the call, both you and your caller need
to hang up the phone.
! While in standby mode, you can recall
Phone book by pushing MULTI-CONTROL
down.
! While in standby mode, you can recall
Missed calls by pushing MULTI-CONTROL
up.
! While in standby mode, you can recall
Dialed calls by pushing MULTI-CONTROL
right.
! While in standby mode, you can recall
Received calls by pushing MULTI-CONTROL
left.

Using the phone number list

Important
! Be sure to park your vehicle and apply the
parking brake when operating the list.
! List can be called up from all sources. The
methods to call up the list are different by the
source.
1 Press PHONE/ /BT MENU to switch to
the phone number list mode.
# If TEL is selected as the source, press
to switch to the phone number list mode.
2 Use MULTI-CONTROL to select a cate-
gory.
Phone book (phone book list)—Missed calls
(missed call list)—Dialed calls (dialed call
list)—Received calls (received call list)
! For more detailed information about
Phone book, see the following section.
/ Calling a number in the phone book on this
page.
! For more detailed information about
Missed calls, Dialed calls and
Received calls, see the following section.
Using the missed, received and dialed call
lists on the next page.
# The name in the Phone book, Missed calls,
Dialed calls or Received calls selected with the
cursor is on for 2 seconds or longer is read out.
# If no names are stored, phone numbers are
displayed.
Calling a number in the phone
book
While this unit and your cellular phone are
being connected, the phone book of this unit
is automatically synchronized with that of the
cellular phone. However, the synchronization
may not be performed depending on the type
of cellular phone. In this case, you will need to
set up the phone book manually. To set up the
phone book, see the following section. Trans-
ferring entries to the phone book on page 39.
After finding the number you want to call in
the phone book, you can select the entry and
make the call.
1 Press PHONE/
the phone number list mode.
# If TEL is selected as the source, press
to switch to the phone number list mode.
2 Use MULTI-CONTROL to select
Phone book.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the first
letter of the name you are looking for.
# You can also perform the same operation by
/LIST
pushing MULTI-CONTROL up or down.
# To change the character, press DISP/SCRL.
Pressing DISP/SCRL switches the character in
the following order.
Alphabet—Russian—Greek
# The order of the first name and last name may
be different from that of the cellular phone.
/BT MENU to switch to
/LIST
En
Section
08
37