1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Car Receiver
  5. DEH-P8100R
  6. Manual

Pioneer DEH-P8100R Manual

Multi-cd/md/dab control high power cd player with rds tuner
Hide thumbs Also See for DEH-P8100R:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual, Operating Manual
Multi-CD/MD/DAB control High power CD player
with RDS tuner
Manual
DEH-P8100R

Advertisement

Table of Contents
loading

Related Manuals for Pioneer DEH-P8100R

Summary of Contents for Pioneer DEH-P8100R

  • Page 1 Multi-CD/MD/DAB control High power CD player with RDS tuner Manual DEH-P8100R...

  • Page 2: Table Of Contents

    To Listen to Music ... 24 Basic Operation of Tuner ... 25 • Manual and Seek Tuning • Preset Tuning • Band Basic Operation of Built-in CD Player ... 26 • Switching the Display • Eject • Switching the Display (only for CD TEXT Discs) •...
  • Page 3 Using the Built-in CD Player ... 45 • Repeat Play (Play Mode) • Random Play (RandomPlay) • Scan Play (Scan Play) • Pause (Pause) • Selecting Tracks by Track Title List (Track List) • Disc Title Input (Title Input ABC) Using Multi-CD Players ...48...

  • Page 4: Installation

    • Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. • Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

  • Page 5: Removing The Unit

    Removing the Unit Frame Pull out to remove the frame. (When reattaching the frame, point the side with a groove downwards and attach it.) Insert the supplied extraction keys into the unit, as shown in the figure, until they click into place.
  • Page 6 WARNING • Avoid installing this unit in such a location where the operation of safety devices such as airbags is prevented by this unit. Otherwise, there is a danger of a fatal accident. • Avoid installing this unit in such a location where the operation of the steering wheel and the gearshift lever may be prevented.

  • Page 7: Control Unit

    Installing the Unit on a Left-Hand-Drive Car • When the unit is installed on a right-hand-drive car, the horizontal positions are inverted. • Fit the inner holder to the steering wheel so that the arrow-marked side faces the driver as shown below. •...

  • Page 8: Connecting The Units

    • This unit is for vehicles with a 12-volt battery and negative grounding. Before installing it in a recreational vehicle, truck, or bus, check the battery voltage. • To avoid shorts in the electrical system, be sure to disconnect the installation.
  • Page 9 • When this product’s source is switched ON, a control signal is output through the blue/white lead. Connect to an external power amp’s system remote control or the car’s Auto-antenna relay control terminal (max. 300 mA 12 V DC). If the car features a glass antenna, connect to the antenna booster power supply terminal.

  • Page 10: Connection Diagram

    Multi-CD player (sold separately) Depending on the kind of vehicle, the function of 3* and 5* may be different. In this case, be sure to connect 2* to 5* and 4* to 3*. Cap (1*) When not using this terminal, do not remove the cap.
  • Page 11 Front output Subwoofer Output or Non Fading Output Blue/white To system control terminal of the power amp (max. 300 mA 12 V DC). The pin position of the ISO connector will differ depending on the type of vehicle. Connect 6* and 7* when Pin 5 is an antenna control type.

  • Page 12: Rfp Alert Installation

    CAUTION • Because of the complexity of today’s technically advanced vehicle wiring systems, we recommend that your RFP Alert be installed ONLY by a professional Pioneer installer. Affix the included deterrent stickers to the inside of the front door windows.

  • Page 13: Door Switch (White/Yellow)

    DOOR SWITCH (White/yellow) Grounding Type Switch: Most European, Japanese, GM and Chrysler vehicles. • Set RFP Alert to recognize ground trigger from RFP Alert Setting Menu. Set Door System to “Door System: Negative, Current mode: Close”. White/yellow Dome light This Product Fuse holder Factory Door Switches...

  • Page 14: Positive (Non-Grounding) Type Switch

    Positive (Non-grounding) Type Switch: Jaguar, Mercedes, Ford • Set RFP Alert to recognize positive trigger from RFP Alert Setting Menu. Set Door System to “Door System: Positive, Current mode: Close”. Dome light Factory Door Switch Installing New Pin Switches Separately sold pin switches are available that can be used to protect your vehicle’s trunk, hood, etc.

  • Page 15: Key Finder

    Head Unit DISPLAY button EQ selector +/– button SOURCE/OFF button Steering Remote Controller A steering remote controller that enables remote operation of the head unit is supplied. Operation is the same as when using buttons on the head unit. BAND button buttons FUNCTION button...

  • Page 16: Before Using This Product

    About This Product • This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals.

  • Page 17: About The Demo Mode

    About the Demo Mode This product features two demonstration modes. One is the Reverse Demo mode, the other is the Feature Demo mode. Reverse Demo If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.

  • Page 18: When Using The Dab (Digital Audio Broadcasting) Tuner

    When using the DAB (Digital Audio Broadcasting) Tuner You can use this product with a separately sold hide-away DAB tuner (GEX-P900DAB, GEX- P900DABII). For details concerning operation, refer to the DAB Tuner’s Operation Manuals. This section provides information on DAB operations with this product which differs from that described in the DAB Tuner’s Operation Manual.

  • Page 19: Operation

    Operation With this product, operation of the following four functions differs. (Reference pages are in the Hide-away DAB Tuner’s Operation Manual.) • Changing the Label (Refer to page 12.) • Changing Display Indications (Refer to page 13.) • Operating Announcements with Function Menu (Refer to page 19.) •...
  • Page 20 Service List Function This product is also equipped with the Service List Function in the Function Menu. It is possible to select the desired Service among the memorized Services in the Service List. Function Menu Functions appear on the display in the following order: Service List (SRVC.

  • Page 21: Precaution

    • Protect the product from moisture. • If the battery is disconnected, the preset memory will be erased and must be reprogrammed. In Case of Trouble Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station.

  • Page 22: Remote Controller And Care

    Using the Steering Remote Controller • Do not operate this unit while manipulating the steering wheel as it might result in a traffic accident. • If you have to operate this unit unavoidably when driving, look ahead carefully to avoid the risk of being involved in a traffic accident.

  • Page 23: Battery

    Battery Install the Lithium Battery ² Replacing the Lithium Battery ² • Replace the battery with a CR2032 lithium battery. • Replace the battery in the unit using a non metallic tapered instrument. WARNING: • Keep the lithium battery out of reach of children. Should the battery be swallowed, immediately consult a doctor.

  • Page 24: Basic Operation

    3 Multi-MD player 3 Multi-CD player 3 External Unit 3 AUX • External Unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this product. Only one External Unit can be controlled by this product.

  • Page 25: Basic Operation Of Tuner

    Basic Operation of Tuner This product’s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations. (Refer to page 38.) Manual and Seek Tuning Manual Tuning (step by step) Seek Tuning • If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast stations.

  • Page 26: Basic Operation Of Built-In Cd Player

    Basic Operation of Built-in CD Player Switching the Display Each press of the DISPLAY button changes the display in the following order: Playback mode (Play Time) 3 Disc Title • If you switch displays when disc titles have not been input, “No Title” is displayed.

  • Page 27: Track Search And Fast Forward/Reverse

    Disc Loading Slot If a CD is inserted, the front panel is closed automatically. The Built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing 8 cm CD.

  • Page 28: Basic Operation Of Multi-Cd Player

    Disc Number Indicator Switching the Display (When playing a CD TEXT disc on a CD TEXT compatible Multi-CD Player) Each press of the DISPLAY button changes the display in the following order: Playback mode (Play Time) 3 Disc Title 3 Disc Artist 3 Track Title 3 Track Artist With text longer than 20 letters, you can scroll to see the rest of the text by pressing the DISPLAY button for 2 seconds.

  • Page 29: Disc Number Search

    Disc Number Search (for 6-Disc, 12-Disc types) • When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6 buttons for 2 seconds. Disc Number Rough Search (for 50-Disc type only) This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the 1 to 5 buttons.

  • Page 30: (For 50-Disc Type Only) Corresponding Display Indications And Buttons

    Corresponding Display Indications and Buttons This product’s display features Key Guidance Indicators. These light to indicate which of the buttons you can use. When you’re in the Function Menu (refer to next section), %!# Detailed Setting Menu (refer to page 34), Initial Setting Menu (refer to page 65) or Audio Menu (refer to page 55), they also make it easy to see which buttons you can use to switch %!#...

  • Page 31: Entering The Function Menu

    Entering the Function Menu The Function Menu lets you operate simple functions for each source. • After entering the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled. Each press changes the Mode ... The button used and the operation it performs are indicated by the key guidance indicator.

  • Page 32: Function Menu Functions

    Regional Function (Regional) Local Seek Tuning (LOCAL) TA Function (Traffic Announcement) News Program Interruption Setting (News) AF Function (AlternativeFrequency) Built-in CD Player Selecting Tracks by Track Title List (Track List) Repeat Play (Play Mode) Random Play (RandomPlay) Scan Play (Scan Play)
  • Page 33 Multi-CD Player Repeat Play (Play Mode) Selecting Discs by Disc Title List (Disc List) Selecting Tracks by Track Title List (Track List) Random Play (RandomPlay) Scan Play (Scan Play) ITS Play (ITS Play) Pause (Pause) Compression and DBE (Compression) : Select (Play Range)

  • Page 34: Entering The Detailed Setting Menu

    Entering the Detailed Setting Menu In the Detailed Setting Menu, you can operate convenient, complex functions for each source. Hold for 2 seconds Each press changes the Mode ... • You can cancel the Detailed Setting Menu by pressing the FUNCTION button again for 2 seconds.

  • Page 35: Detailed Setting Menu Functions

    For more details, or when you want to know about an operation, refer to the page number indicated in the chart. Tuner Program Function (Program Function) Built-in CD Player Disc Title Input (Title Input ABC) Program Function (Program Function) Multi-CD Player...

  • Page 36: Tuner Operation

    Local Seek Tuning (LOCAL) When Local mode is ON (“LOC” indicator lights), you can only select broadcast stations providing strong reception. : LEVEL 1 4 LEVEL 2 4 LEVEL 3 4 LEVEL 4 MW/LW : LEVEL 1 4 LEVEL 2 •...

  • Page 37: Using Rds Functions

    What is RDS? RDS (Radio Data System) is a system for transmitting data along with FM programs. This data, which is inaudible, provides a variety of features such as: program service name, program type display, traffic announcement standby, automatic tuning and program type tuning, intended to aid radio listeners in tuning to a desired station.

  • Page 38: Af Function (Alternativefrequency)

    AF Function (AlternativeFrequency) The AF (Alternative Frequencies search) function is used to search for other frequencies in the same network as the currently tuned station. It automatically retunes the receiver to another frequency in the network which is broadcasting a stronger signal when there are problems with reception of the currently tuned station or better reception is possible on a different frequency.

  • Page 39: Pi Seek Function

    PI Seek Function The tuner searches for another frequency broadcasting the same programming. “PI Seek” appears on the display and the radio volume is muted during a PI Seek. The muting is discontinued after completion of the PI Seek, whether or not the PI seek has succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency.

  • Page 40: Traffic Announcement Standby Function

    Traffic Announcement Standby Function (Traffic Announcement) The TA (Traffic Announcement standby) function lets you receive traffic announcements automatically, no matter what source you are listening to. The TA function can be activated for either a TP station (a station that broadcasts traffic information) or an EON TP station (a station carrying information which cross-references TP stations).

  • Page 41: Canceling Traffic Announcements

    Canceling Traffic Announcements The announcement is canceled but the tuner remains in the TA mode until the TA button is pressed again. Adjusting the TA Volume When a traffic announcement begins, the volume adjusts automatically to a preset level to enable you to hear the announcement clearly.

  • Page 42: Pty Function

    PTY Function With Wide and Narrow classification of program type, the PTY function provides two ways to select stations by the type of program being broadcast (PTY Search). It also provides automatic tuning to emergency broadcasts (PTY Alarm). • There’s no need to perform PTY Search settings again if they have previously been set. After switching to the PTY Search Setting mode in Step 1, just perform PTY Search in Step 4.

  • Page 43: News Program Interruption Setting (News)

    News Program Interruption Setting (News) You can switch automatic reception of PTY code news programs ON/OFF. When a received news program ends, reception of the previous program resumes. Hold for 2 seconds • You can also switch the News Program Interruption Setting ON/OFF in the Function Menu. PTY Alarm PTY Alarm is a special PTY code for announcements regarding emergencies such as natural disasters.

  • Page 44: Pty List

    PTY List News&Inf News Affairs Info Sport Weather Finance Popular Pop Mus Rock Mus Easy Mus Oth Mus Jazz Country Nat Mus Oldies Folk Mus Classics L. Class Classic Others Educate Drama Culture Science Varied Children Social Religion Phone In Touring Leisure Document...

  • Page 45: Using The Built-In Cd Player

    Repeat Play (Play Mode) Repeat Play plays the same track repeatedly. • If you perform Track Search or Fast Forward/Reverse, Repeat Play is automatically canceled. Random Play (RandomPlay) Random Play plays the tracks on a CD in random order for variety.

  • Page 46: Scan Play (Scan Play)

    Scan Play (Scan Play) Scan Play plays the first 10 seconds or so of each track on an CD in succession. If the Function Menu has been canceled automatically, select the Scan mode in the Function Menu again. • Scan Play is canceled automatically after all the tracks on a disc have been scanned. Pause (Pause) Pause pauses the currently playing track.

  • Page 47: Selecting Tracks By Track Title List

    • When only playing a CD TEXT disc on this product, you can switch to this mode. Disc Title Input (Title Input ABC) You can input up to 48 disc titles for CDs in the Built-in CD player. (Refer to “Disc Title Input” on page 52 under “Using Multi-CD Players”.) •...

  • Page 48: Using Multi-Cd Players

    3 Disc Repeat (“Disc Repeat” is displayed) • If you select other discs during the repeat play, the repeat play range changes to Multi-CD player Repeat. • If you perform Track Search or Fast Forward/Reverse during One-track Repeat, the repeat play range changes to Disc Repeat.

  • Page 49: Scan Play (Scan Play)

    Scan Play (Scan Play) In the Disc Repeat, the beginning of each track on the selected disc is scanned for about 10 seconds. In the Multi-CD player Repeat, the beginning of the first track on each disc is scanned for about 10 seconds.

  • Page 50: Compression And Dbe (Compression)

    Comp. OFF 3 DBE 1 3 DBE 2 • You can use these functions with a Multi-CD player that has them. If the player does not feature the Comp./DBE functions, “No Comp.” is displayed if you try to use them.

  • Page 51: Its (Instant Track Selection)

    ITS (Instant Track Selection) The ITS function allows you to search for the track you wish to play when a Multi-CD player is installed. You can use ITS to program automatic playback of up to 24 tracks per disc from up to 100 discs.

  • Page 52: Erase A Track Program

    (You can store ITS program and Disc Title data for up to 100 discs in memory.) • When playing a CD TEXT disc on a CD TEXT compatible Multi-CD player, you cannot switch to this mode.
  • Page 53 Each press of button 1 changes the Character type in the following order: Alphabet (Upper case), Numbers and Symbols 3 Alphabet (Lower case) 3 European letters, such as those with accents (e.g. á, à, ä, ç) • You can select to input Numbers and Symbols by pressing button 2. To insert a space, select the flashing cursor “_”.

  • Page 54: Selecting Discs By Disc Title List

    Selecting Tracks by Track Title List (Track List) Every 6 tracks on a CD TEXT disc are displayed. You can scroll the display. • When only playing a CD TEXT disc on a CD TEXT compatible Multi-CD player, you can switch to this mode.

  • Page 55: Audio Adjustment

    Adjustment” on page 57 and “Equalizer Curve Fine Adjustment” on page 58.) • You can create different “CUSTOM” curves for different sources. (The Built-in CD player and Multi- CD player are set to the same Equalizer Curve Adjustment setting automatically.) •...

  • Page 56: Audio Menu Functions

    Audio Menu Functions The Audio Menu features the following functions. Balance Adjustment (FAD/BAL) This function allows you to select a Fader/Balance setting that provides ideal listening conditions in all occupied seats. “Fader Front:15” – “Fader Rear:15” is displayed as it moves from front to rear. “Balance Left:9”...

  • Page 57: Equalizer Curve Adjustment (Equaliz E R)

    Equalizer Curve Adjustment (Equaliz You can adjust the currently selected equalizer curve settings as desired. Adjusted equalizer curve settings are memorized in “CUSTOM”. LOW BAND MID BAND HIGH BAND The display shows “+6” – “– 6”. • If you make adjustments when a curve other than “CUSTOM” is selected, the newly adjusted curve will replace the previous adjusted curve.

  • Page 58: Equalizer Curve Fine Adjustment (Equaliz E R)

    Equalizer Curve Fine Adjustment (Equaliz You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (LOW BAND/MID BAND/HIGH BAND). Adjusted equalizer curve settings are memorized in “CUSTOM”. Level (dB) Center frequency 40 4 80 4 100 4 160 (Hz) LOW: 200 4 500 41k 4 2k (Hz) MID:...

  • Page 59: Loudness Adjustment (Loudn E Ss)

    Loudness Adjustment (Loudn The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level. Low 4 Mid 4 High Subwoofer Output (Sub W-1) When a Subwoofer is connected, switch Subwoofer output ON. Initially, Subwoofer output is OFF.

  • Page 60: Subwoofer Setting Adjustment (Sub W-2)

    Subwoofer Setting Adjustment (Sub W-2) When the Subwoofer output is ON, you can adjust the cut-off frequency and the output level of Subwoofer. The display shows “+6” – “– 6”. • You can select the Subwoofer setting mode only when Subwoofer output is switched ON in the Subwoofer ON/OFF mode.

  • Page 61: Non-Fading Output Level Adjustment

    Non-Fading Output Level Adjustment (Non Fa When the Non-Fading output is ON, you can adjust the level of Non-Fading output. The display shows “0” – “–15”. • You can select the Non Fading Output setting mode only when Non Fading Output is switched ON in the Non Fading Output ON/OFF mode.

  • Page 62: Front Image Enhancer Function (Fie)

    Front Image Enhancer Function (FIE) The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to low-range frequencies. You can select the frequency you want to cut. •...

  • Page 63: Source Level Adjustment (Sla) Function

    • The MW/LW volume level, which is different from the FM base setting volume level, can also be adjusted similar to sources other than tuner. • The Built-in CD player and Multi-CD player are set to the same volume adjustment setting automatically.

  • Page 64: Front Panel

    Theft Protection The front panel of the head unit is detachable to discourage theft. • Never use force or grip the display tightly when removing or replacing the front panel. • Avoid subjecting the front panel to excessive shocks. • Keep the front panel out of direct sunlight and high temperatures. Detaching the Front Panel •...

  • Page 65: Initial Setting

    Entering the Initial Setting Menu With this menu, you can perform initial settings for the product. Hold for 2 seconds Each press changes the Mode ... • Holding down the FUNCTION button for 2 seconds also cancels the Initial Setting Menu.

  • Page 66: Initial Setting Menu Functions

    Initial Setting Menu Functions The Initial Setting Menu features the following functions. Changing the FM Tuning Step (FM tuning step) Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to 100 kHz when the AF or TA mode is activated. It may be preferable to set tuning step to 50 kHz in the AF mode.

  • Page 67: Switching The Auto Pi Seek (Auto Pi Seek)

    Switching the Auto PI Seek (Auto PI Seek) During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF. (Refer to “PI Seek Function” on page 39.) Setting the Warning Tone (Warning Tone) You can switch the Warning Tone function ON/OFF. (Refer to “Warning Tone” on page 64.) Switching the AUX Mode (AUX) It is possible to use auxiliary (AUX) equipment with this product.

  • Page 68: Switching The Rear Speaker Output

    Switching the Rear Speaker Output (Rear Speaker Out) This product's rear speaker leads can be used for full-range speaker (“Full Range output”) or Subwoofer (“Sub woofer output”) connection. If you switch Rear Speaker Lead setting to the “Sub woofer output”, you can connect a rear speaker lead directly to a Subwoofer without using an auxiliary amp.

  • Page 69: Setting The Dimmer (Dimmer)

    Setting the Dimmer (Dimmer) To enable this product’s display from being too bright at night, when the vehicle’s head lights are turned ON the display is dimmed. You can switch this function ON/OFF. Selecting the Illumination Color (Illumination Color) This product is equipped with two illumination colors, green and red. You can select the desired illumination color.

  • Page 70: Selecting The Wall Paper (Wall Paper)

    Selecting the Wall Paper (Wall Paper) This product is equipped with three types of wall paper. Selecting the Brightness (Brightness) You can select the display brightness. The display shows “0” – “31”.

  • Page 71: Rfp Alert Function

    Activating the RFP Alert Feature Pioneer has developed a menu display that allows you to set-up your RFP Alert to meet your personal needs. By scrolling through this menu it is possible to select your own “Entry Delay Time”, “Speaker Output Volume”...

  • Page 72: Activating Internal Speaker On/Off

    Activating Internal Speaker ON/OFF This feature allows you to select whether or not the speaker output is sounded when the “RFP Alert” is triggered. Initially from the factory the speaker output is activated. Toggling between ,  buttons allows you to deactivate or activate the “Speaker Output”. If you switch the speaker output OFF, you cannot change the “Test Mode”.

  • Page 73: Selecting Door Switching Systems

    Selecting Door Switching Systems It is necessary to select the correct “Door System Type” (Negative or Positive switching) for that of your vehicle. Initially, the system is set for vehicles with the grounding type (Negative switching). Select the correct “Door System Type” of your vehicle from below. Vehicles to select “Door System: Negative, Current mode: Close”...

  • Page 74: Operation Of "Rfp Alert

    Upon entering your vehicle, and within the “Entry Delay Time” set within the “RFP Alert Menu”, attach your Pioneer Front Panel as described on page 64. If you have forgotten your removable front panel, simply insert the ignition key in the ignition...

  • Page 75: Entry Detection

    Entry Detection If the “RFP Alert” was not disarmed in accordance with “Disarming Alert”, the “RFP Alert” will be triggered. The “RFP Alert” will sound for 60 seconds and will repeat 5 times if any door is left open or reopened. After the fifth time the “RFP Alert” will reset to prevent continuous sounding and prevent your battery from discharging.

  • Page 76: Other Functions

    Switching the Entertainment Display You can change the display to the movie screens, etc. while listening to each source. (e.g. MOVIE SCREEN MODE 1) Each press changes the Display ... Each press of the ENTERTAINMENT button changes the display in the following order: LEVEL INDICATOR 3 MOVIE SCREEN MODE 1 3 MOVIE SCREEN MODE 2 3 Display before entering the Entertainment Display Using the PGM Button (Program Function)

  • Page 77: Using The Pgm Button

    The PGM button operates in a different way depending on the function programmed (memorized). Tuner Best Stations Memory (BSM) Regional Function (Regional) Local Seek Tuning (Local) Built-in CD Player Pause (Pause) Repeat Play (Repeat) Random Play (Random) Multi-CD Player Pause (Pause)

  • Page 78: Using The Aux Source

    Using the AUX Source It is possible to use auxiliary (AUX) equipment with this product. To listen to auxiliary equipment, switch the AUX Mode in the Initial Setting Menu ON, and then select the desired source. Selecting the AUX Source Each press changes the Source ...

  • Page 79: Cd Player And Care

    Precaution • Play only CDs bearing the Compact Disc Digital Audio mark. (If a CD features the top right mark on its disc title side, that disc is a CD TEXT disc. There are also some CD TEXT discs that do not feature the top right mark.) •...

  • Page 80: Built-In Cd Player's Error Message

    When problems occur with CD playback, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, contact your dealer or your nearest PIONEER Service Center. ERROR- 11, 12, 17, 30...

  • Page 81: Specifications

    Subwoofer output Frequency ... 50/80/125 Hz Slope ... –18 dB/oct. Gain ... ±12 dB Phase ... Normal/Reverse CD player System ... Compact disc audio system Usable discs ... Compact disc Signal format ... Sampling frequency: 44.1 kHz 157 (D) mm Frequency characteristics ...
  • Page 82 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: (905) 479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. San Lorenzo Num 1009 3er piso Desp. 302 Col. Del Valle, Mexico D.F. C.P. 03100 TEL: 5-688-52-90 Published by Pioneer Electronic Corporation.

Table of Contents