KTM 990 ADVENTURE EU Owner's Manual page 169

SERVICE WORK ON THE ENGINE
–
Raise the vehicle off of the center stand. (
–
Lean the vehicle on the side stand.
–
Place a suitable container under the engine.
–
Remove oil drain plug
–
Fully drain the engine oil out of the oil tank.
–
Remove screws
100626-10
–
Pull oil screen
–
Remove the oil filter.
–
Clean all oil screens and oil drain plugs with a magnet.
–
Clean all sealing surfaces.
100627-10
–
Check seal ring
–
Insert oil screen
–
Position the oil line. Mount and tighten the screws.
Guideline
Remaining chassis screws
–
Mount oil drain plug
100628-10
.
7
and move oil line to one side.
8 9
out of the oil tank.
bk
x ( p. 169)
of the oil screen for damage and correct seating.
bl
into the oil tank.
bk
with the magnet and new seal and tighten.
7
p. 77)
M6 10 Nm (7.4 lbf ft)
167