KTM 990 ADVENTURE EU Owner's Manual page 168

SERVICE WORK ON THE ENGINE
–
Switch off all power consumers and switch off the engine.
(990 Adventure)
–
Remove the crash bar.
–
Turn the knurled screws on both fuel taps clockwise as far as possible.
–
Remove the front side cover. (
–
Remove the seat. (
–
Remove the storage compartment and hang it to one side.
–
Remove the left fuel tank.
Main work
–
Place a suitable container under the engine.
–
Remove the oil drain plug
–
Fully drain the engine oil out of the engine.
–
Remove screws
–
Pull oil screen out of the engine case with pliers.
100624-10
–
Remove screw
100625-10
x ( p. 84)
p. 80)
p. 83)
( p. 87)
x
with the magnet and seal ring.
1
and cover .
2 3
on the right fuel tank and remove screws
4
166
x ( p. 86)
. Take off bracket .
5 6