Table of Contents
Advertisement
8. Clone
With cloning it is possible to copy to/from a USB device the configuration data and the channel list data from a TV.
Place a USB Memory stick in the USB side connector of the TV.
*The USB device should be formatted as FAT or FAT32.
Access the Hotel Mode Menu with the RC 2573 (yellow remote) and navigate with the TV remote.
[Copy from USB]
1. Select [Copy from USB] and press OK.
2. The clone data will be loaded from the USB device into the TV.
3. Wait until the OSD message returns to its earlier state before removing the USB device.
4. Power down the TV and remove the USB device.
[Copy to USB]
1. Select [Copy to USB] and press OK.
2. The clone data will be loaded from the TV into USB device.
3. Wait until the OSD message returns to its earlier state before removing the USB device.
Content of the USB key:
The table is showing the cloning possibility between different screens sizes of the Studio Range.
Note: The cloning files are not compatible between all screens sizes.
Destination
Source
19HFL2807D
24HFL2808D
26HFL2808D
32HFL2808D
39HFL2808D
19HFL2807D
24HFL2808D
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
26HFL2808D
32HFL2808D
YES
NO
YES
NO
YES
NO
NO
YES
NO
YES
39HFL2808D
NO
NO
NO
YES
YES
23
Advertisement
Table of Contents
