Table of Contents
Advertisement
12.
Clone
With cloning it is possible to copy to/from a USB device the configuration data and the channel list data from a TV.
Place a USB Memory stick in the USB side connector of the TV.
*The USB device should be formatted as FAT or FAT32.
Access the Hotel Mode Menu with the RC 8573 (yellow remote) or with the guest remote by entering the key
sequence 3,1,9,7,5,3,MUTE and navigate with the TV remote to following items:
[Copy from USB]
1. Select [Copy from USB] and press OK.
2. The clone data will be loaded from the USB device into the TV.
There can be multiple clone files stored on one USB drive. They are identified by an increasing number added
to the directory name. If multiple clone files are available a file explorer will be shown to select the correct one.
3. Wait until the OSD message returns to its earlier state before removing the USB device.
4. Power down the TV and remove the USB device.
[Copy to USB]
1. Select [Copy to USB] and press OK.
2. The clone data will be loaded from the TV into USB device.
There can be multiple clone files stored on one USB drive. They are identified by an increasing number added
to the directory name. If multiple clone files are available a file explorer will be shown to select the correct one.
3. Wait until the OSD message returns to its earlier state before removing the USB device.
Content of the USB key:
Because the clone data is stored inside a folder, multiple clone data can be stored on the same USB key.
The cloning is compatible between all screen sizes.
27
Advertisement
Table of Contents
