Menu Tree - GE GEK 106168E Instructions Manual

8. KEYBOARD AND DISPLAY

8.1. MENU TREE.

The DBF has different menus divided into levels. The Level 0 is the steady state screen. The Level 1 of the
different menus is accessed by pressing the corresponding group key (SET, INF, etc.). The scrolling within a
given level is done by using the UP and DOWN arrows. It is possible to go down to levels 2 and 3 by pressing the
ENT key. Press CLR to go up a level within the menu tree. The Level 1 for each of the five groups is shown in the
following table :
Group
42
Level 1
VIEW SETTINGS
CHANGE SETTINGS
CHANGE COUNTER
STATUS
SET DATE/TIME
TRIGGERING
I
a
I
n
2
I t A COUNTER
Nº OPENINGS
3/2-Phase Logic
50BF Pickup
Relay ON/OFF
52A Status
52B Status
52C Status
LATCHING RELAY 1 Status
LATCHING RELAY 2 Status
DATE & TIME
NETWORK SPEED
NETWORK STOP BITS
LOCAL SPEED
LOCAL STOP BITS
LOCAL SETTINGS
REMOTE SETTINGS
LOCAL OPERATION A
REMOTE OPERATIONS
UNIT NUMBER
PASSWORD
t TIME-OUT
DBF Breaker Failure Protection
Description
View settings
Change settings
Change counters
Shows the status of the relay
Change date and time
Triggers the oscillography
Ia current in primary Amps
In current in primary Amps
2
Accumulated kA sec. for phase A
Accumulated number opens
Shows logic for 50BF High Set.
Shows status of 50BF
Relay ON/OF condition
Breaker Pole A (open/closed)
Breaker Pole B (open/closed)
Breaker Pole C (open/closed)
Latching Relay 1 (open/closed)
Latching Relay 2 (open/closed)
Shows date and time
PORT3 (remote) comm. Speed
PORT3 (remote) Stop bits
PORT1&2 (local) comm. Speed
PORT1&2 (local) Stop bits
Local settings change allowed
Remote settings change allowed
Local operations allowed
Remote operations allowed
Number of the unit
View/Change comm. Password
Max. t between 2 synch signals (only for
relays in DDS integrated systems)
GEK-106168E