Control Group (Act Key) - GE GEK 106168E Instructions Manual

8.4. CONTROL GROUP (ACT KEY)

Being on the steady-state screen of LCD at the front of the relay, by Pressing ACT key, the following will prompt:
Pressing ENT key the system allows to set the date and time by entering the year, month, day hour, minutes and
seconds in this sequence. After each setting the ENT key must be pressed.
If instead of pressing the ENT key when the SET DATE/TIME screen appears, the arrow key (up or down) is
pressed, the next screen will be shown:
By pressing ENT key, the following sequence will be displayed:
GEK-106168E
SET
DATE/TIME
COMMUNICATION
TRIGGER
CONFIRM: Yes/No ?
OPERATION EXECUTED/OPERATION CANCELED
DBF Breaker Failure Protection
8. KEYBOARD AND DISPLAY
47