Section 3 − Definitions; Manufacturer's Warning Label Definitions - Unitor UWI 400 Owner's Manual

3-1. Manufacturer's Warning Label Definitions

Warning! Watch Out! There are possible
hazards as shown by the symbols.
1 Electric shock from welding electrode
or wiring can kill.
1.1 Wear dry insulating gloves. Do not
touch electrode with bare hand. Do
not wear wet or damaged gloves.
1.2 Protect yourself from electric shock by
insulating yourself from work and
ground.
1.3 Disconnect input plug or power before
working on machine.
1 1.1
2 2.1 2.2
3 3.1
SECTION 3 − DEFINITIONS
2 Breathing welding fumes can be
hazardous to your health.
2.1 Keep your head out of the fumes.
2.2 Use forced ventilation or local exhaust
to remove the fumes.
2.3 Use ventilating fan to remove fumes.
3 Welding sparks can cause explosion
or fire.
3.1 Keep flammables away from welding.
Do not weld near flammables.
3.2 Welding sparks can cause fires. Have
a fire extinguisher nearby, and have a
watchperson ready to use it.
1.2 1.3
2.3
3.2 3.3
3.3 Do not weld on drums or any closed
4
4.1 Wear hat and safety glasses. Use ear
5
6
4 4.1
5
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
Kasjf;laksf;lkasdf'l;aksdf;lkasd;flksadflkasd;lk
6
containers.
Arc rays can burn eyes and injure
skin.
protection and button shirt collar. Use
welding helmet with correct shade of
filter. Wear complete body protection.
Become trained and read the
instructions before working on the
machine or welding.
Do not remove or paint over (cover)
the label.
179310-B
OM-202 137 Page 11