Programming User Custom Message; Functions Related With Vmib; Date & Time Prompt; Station Number Prompt - LG Nortel GDC-400 User Manual

7.Key System Functions

7.20 Programming User Custom Message

A user may program a custom message to be displayed on the LCD of calling terminal.
1) Press TALK (
2) Press PROGRAM (
3) Press
4) (Confirmation tone will be heard.)
5) Enter the message. (Up to 10 letters can be entered by using codes shown in the above
"Programming A Name Into Display")
6) Press PROGRAM (
heard.)

7.21 Functions Related with VMIB

7.21.1 Date & Time Prompt:
1) Press TALK (
2) Press PROGRAM (
3) Press

7.21.2 Station Number Prompt

1) Press TALK (
2) Press PROGRAM (
3) Press .

7.21.3 Station status prompt

1) Press TALK (
2) Press PROGRAM (
3) Press .
A user will hear below items, (a-h). (c-g) items will not be heard unless they are
activated.
Station number XXXX
Listed message X
Wake-up time XXXX AM or PM
Do not disturb
Forwarded to station XXXX
Forwarded to speed bin/STA/HUNT XXX
Locked (temporary COS change)
COS X

7.21.4 To record a greeting

1) Press TALK (
2) Press PROGRAM (
3) Press .
4) Press # to start recording.
5) Press PROGRAM (
) button.
) button longer than 1 second.
.
) button longer than 1 second. (Confirmation tone will be
) button.
) button longer than 1 second.
.
) button.
) button longer than 1 second.
) button.
) button longer than 1 second.
) button.
) button longer than 1 second.
) button longer than 1 second or END (
57
) button.