Table of Contents
Advertisement
6.Programming Features
3)
Dialing color When you set this function each number is displayed on screen with a
different color.
4)
If you want to change the contrast, select Contrast Set and press the OK (
And then change the contrast with the LEFT/RIGHT(
(
) button.
5)
If you want to change the lighting, select Lighting Set and press the OK (
And then select one of the menu, "Standard", "Always On", "Always Off", "Sleep
Mode", and press the OK (
"Standard" and will be inactive when you select other mode.
6)
If you want to change the dialing color, select Dialing Color and change to Yes or No
with the LEFT/RIGHT (
7)
If you set sleep mode to "yes", phone will be turn off LCD after 1minute after LCD
backlight turning off.
Note
Standard : the lighting turns off after about 20 seconds from the last key pressure.
6.5.5 Language
The four multi languages are provided. One of four, English, Italian, Spanish, Russian can be
selected by pressing LEFT/RIGHT (
the language on the phone. To change the language of system, you should refer to system
programming manual.
6.5.6 Silent Mode
A user can make silent mode of the phone. Silent mode is set by pressing the
than 1 second when the phone is in idle state and then there is one time vibration. In silent
mode, there aren't beep tones, key tones and rings. But for being conscious of incoming call
there is phone vibration.
To cancel the silent mode, pressing the
idle state, then confirmation tone is heard and silent mode function is disabled.
Silent mode can be enabled or disabled by pressing the LEFT/RIGHT (
press OK (
) button.
6.5.7 Keypad Lock
This function is to prevent from pressing any key unconsciously. In keypad lock mode, when a
user receives a call, the mode is changed to the key-unlock mode automatically. When hanged
up a call, the mode is returned to the keypad lock mode. A user can only receive an incoming
call in this mode.
1)
This function is set to ENABLE or DISABLE by Keypad Lock setting operation in Phone
Setting Menu. The initial state is Unlock. Once this function is set to ENABLE, any key
operation is not available except Unlock soft key. While setting this function, a user can
receive a call if there is an incoming call.
2)
You can also set Keypad Lock to enable by pressing
directly.
When key lock mode is set, "Keypad Locked" is displayed on the LCD and all keys can't be
entered except for key-unlock procedure.
1)
To release the locked key, press Unlock (
) button. "Sleep Mode" can be selected with
) buttons, and then press the OK (
) button, and press OK (
button more than 1 second when the phone is in
) button and OK(
45
) button.
) buttons, and press the OK
) button.
) button.
) button. This sets only
button more
) button, and
button in standby mode
) button.
Advertisement
Table of Contents
