Page 1 LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) CDMA Fixed Wireless Terminal User Guide Model: LST-230(F) & 2300(F)
Page 2 LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) REVISED HISTORY DATE ISSUE CONTENTS OF CHANGES S/W VERSION 2000.02 ISSUE 1 Initial Release Please read this manual before you use this product. This manual is based on the production version of LST- 230(F)/2300(F) FWT.
Page 3 LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) Blank Page...
Page 4: Table Of Contents
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) Table of Contents 1. Before You Start .....................7 1.1 Safety Information ........................7 1.2 Optimal Phone Performance ..................... 7 1.3 Care and Service........................8 2. Introduction......................9 2.1 Front View of the Terminal....................... 10 2.2 3 LEDs Indicators ........................
Page 5 LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 6. Troubleshooting ....................24 7. General Information ....................25 7.1 LST-230(F) ..........................25 7.2 LST-2300(F) ..........................26...
Page 6: Before You Start
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 1.1 Safety Information Warning To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. Do not use this product near swimming pools or other bodies of water.
Page 7: Care And Service
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) Avoid shock or impact. We recommend you to charge the backup battery before initial use. Backup battery may be discharged during delivery. 1.3 Care and Service Unplug the Telephone from the wall outlet and remove antenna (or disconnect antenna cable) before cleaning.
Page 8: Introduction
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) Congratulations on your purchase of the LGIC Fixed Wireless Terminal that has been designed to operate on the latest digital mobile communications technology, Code Division Multiple Access (CDMA). This CDMA digital technology has greatly enhanced voice clarity and can provide various advanced features. The terminal enables the normal operation and direct connection of standard telephone equipment into the cellular network.
Page 9: Front View Of The Terminal
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 2.1 Front View of the Terminal < Figure 1 > ITEM DESCRIPTION LEDs Indicate the status of the unit DC-12V AC Power Adapter Phone/FAX (RJ-11 Jack) Connecting Port for Single Line Telephone or G3 FAX...
Page 10: Leds Indicators
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 2.2 3 LEDs Indicators COLOR Operating Condition GREEN-solid DC Power is applied POWER LED ORANGE-solid Battery Power is applied RED-solid Low Battery GREEN-solid Good Signal SIGNAL LED ORANGE-solid Poor Signal RED-solid No Service Area GREEN –...
Page 11: Step Ii. Place The Terminal
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) STEP II. Place the Terminal Place the terminal on the stable flat secure surface area (desk, table, etc.). Avoid direct exposure to the sun lights and damp area. Read the Safety Information located at the first part of this document before you place the terminal.
Page 12 RJ-11C RJ-11C TELEPHONE G3 Analog Fax [LST-230F] * Note : - G3 Fax can not connected to your LST-230 terminal. - Length between LST-230(F) and Telephone : over 1m. The adapter type(with power cord) may be different by country adaptation.
Page 13: Installation Steps
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) RJ-11C RJ-11C TELEPHONE G3 Analog Fax [LST-2300F] * Note : - G3 Fax can not connected to your LST-2300 terminal. - Length between LST-2300(F) and Telephone : over 1m. < Figure 2. Connection Diagram with External Equipment >...
Page 14: Basic Operation
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 3.1 Power On 1. The POWER LED indicates the presents status; Using AC Adapter : Solid Green Using internal battery : Solid ORANGE Using internal battery and battery is week : Solid Red 2.
Page 15: Emergency Call(Enblock Mode Only)
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 3.7 Emergency Call(Enblock mode only) When emergency call number is connected once, it will not be terminated unless the called party disconnects the call(Emergency Call Hold Service). Therefore even caller hangs up the phone, the line will be still connected, so if the caller picks up the phone again, he can continue talking.
Page 16: System Features
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 4.1 Hook flash When the terminal receives a hook-flash from the connected telephone device, it will automatically allow: For producing dial tone again after a phone number has been dialed without connection.
Page 17: Applications
Voice Mail or to change Voice-Mail Ring pattern. Caller ID – LST-230(F)/2300(F) can support Caller ID service if you have a telephone with Caller ID feature. Please contact your cellular service provider for more information on using this service.
Page 18: Programming
Press “*” key to save and you will hear confirmation tone. 5.1 Speed Dial(Enblock mode only) LST-230(F)/2300(F) has 30 memory locations (1~30:1 or 2 digits) to store frequently used phone numbers and you can make a call by pressing memory location number only when the speed dial feature is enabled.
Page 19: Operation
Lift handset and dial tone will be heard. Press speed dial number and wait for dial timeout(5 seconds). 5.2 Emergency Call(Enblock mode only) LST-230(F)/2300(F) has 3 emergency call numbers (1~3) and max. 32 digits can be stored in each emergency call number. Entering the emergency phone number Press “#”+”#”+”2”...
Page 20: Disable The Hot Line Feature
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) Disable the Hot Line Feature Press “#”+”#”+”3” continuously to enter Hot Line programming mode. Press “#” and Hot Line Disable code “2”. Press “*” to save. Programming the Hot Line Time Press “#”+”#”+”3” continuously to enter Hot Line programming mode.
Page 21: Volume Level
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 5.5 Volume Level There are three voice volume levels to be controlled by software, and you can set the level to the adequate conversation volume. Changing the Volume Level Press “#”+”#”+”5” continuously to enter Volume Level programming mode.
Page 22: Enable Or Disable G3 Fax Mode
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) Enable or Disable G3 FAX mode Press “#”+”#”+”7” continuously to enter G3 FAX programming mode. Press “#” and Enable (“1”) or Disable (“2”) code. Enable means that Data call path is changed to G3 FAX.
Page 23: Troubleshooting
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) In the event you are unable to place or receive telephone calls, first check the appropriate power indication on the LED. In case of no power, check the wiring connections between the power outlet and the terminal. Check for the appropriate service indication on the LED.
Page 24: General Information
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 7.1 LST-230(F) Main Unit Item Description Tx Frequency Digital : 824 ~ 849 MHz Rx Frequency Digital : 869 ~ 894 MHz Channel Bandwidth 1.25 MHz Digital : ±300 Hz Frequency Stability Tx Power Digital : Max.
Page 25: Lst-2300(F)
LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) 7.2 LST-2300(F) Main Unit Item Description Tx Frequency Digital : 1850 ~ 1910 MHz Rx Frequency Digital : 1930 ~ 1990 MHz Channel Bandwidth 1.25 MHz Digital : ±150 Hz Frequency Stability Tx Power Digital : Max.
Page 26 LGIC CDMA Fixed Wireless Terminal LST-230(F) / 2300(F) Licensed by QUALCOMM Incorporated under one or more of the following Patents: U.S, Patent No. 4,901,307 U.S, Patent No. 5,056,109 U.S, Patent No. 5,099,204 U.S, Patent No. 5,101,501 U.S, Patent No. 5,103,459 U.S, Patent No. 5,107,225...

This manual is also suitable for:

Lst-230f Lst-2300 Lst-2300f