Table of Contents
Advertisement
7.Key System Functions
3)
Press SPEED (
4)
Dial speed bin number. (ipLDK-24/100/300/300E: 000~099)
(Only available speed bin is displayed on the LCD. And only one speed bin number is
displayed at every time using this function.)
5)
Dial a phone number to be stored.
6)
Press PROGRAM (
7)
Enter the dial name.
(
Refer to "programming a name into display")
8)
Press PROGRAM (
9)
Press END (
) button.
10) You can store speed dials by repeating the above procedure.
STOP!
If all speed bins are stored, speed bin number is displayed as '000' on the LCD.
You can newly edit speed bin that is already used.
7.5.2 Using Station Speed Bin Numbers
1)
Press TALK (
2)
Press SPEED (
3)
Dial speed bin number (ipLDK-24/100/300/300E: 000~099).
7.5.3 Erasing Station Speed Bin Numbers
1)
Press TALK (
2)
Press PROGRAM (
3)
Press SPEED (
4)
Dial speed number bin to be erased.
5)
Press PROGRAM (
(Confirmation tone will be heard)
6)
Press END (
) button.
7.5.4 Storing System Speed Bin Numbers
You can use commonly speed dial numbers stored in the system.
1)
Storing system speed dial number can be done only at the admin station.
2)
Available CO line can be assigned at that time storing system speed dial number.
7.5.5 Using System Speed Numbers
1)
Press TALK (
2)
Press SPEED (
3)
Dial speed bin number.
(ipLDK-24/100: 2000~3499, ipLDK-300: 2000~4999,ipLDK-300E: 2000~6999).
STOP!
When a user makes a call to some exclusive subscribers or all CO lines are reserved, error
tone is heard.
A speed dial number can be programmed as one that there is no limit about a long
distance call. (Refer to "Digital Key Telephone System Installation and Programming
Manual")
) button shorter than 1second.
) button longer than 1 second.
) button longer than 1 second.
) button.
) button shorter than 1 second.
) button.
) button longer than 1 second.
) button shorter than 1 second.
) button longer than 1 second.
) button.
) button shorter than 1 second.
49
Advertisement
Table of Contents
