Table of Contents
Advertisement
9. Installation of Wireless Terminal
9.4 De-subscription II
There is another way to de-subscribe locally. The subscription data of the phone (stored in MPB
and WTIB or the wireless terminal) should be erased separately at both sides by 9.3 de-
subscription Ⅰ procedure. But you lost a phone or MPB and WTIB by accident, you can use
this procedure. Then, you should be more careful in doing this procedure. It is because this
procedure is for abnormal case.
To De-subscribe users locally in the system
At the Attendant Station
To de-subscribe all of subscribed wireless terminal at once,
+ 0 #+ Flex. Button 7 + Password (147*) +
TRANS/PGM
Please, refer to 'Installation & Maintenance Manual' about "Password" in detail.
To de-subscribe one subscribed wireless terminal,
+ 0 # + Flex. Button 8 + Station No +
TRANS/PGM
1)
Press [TRANS/PGM], then it will be the User Programming Mode(you will see the
flashing [TRANS/PGM] LED (60 IPM Flash) and [MON] LED on ).
2)
Press 0#.
3)
Press Flexible button 7 or 8.
4)
Enter password or a station number.
5)
Press [HOLD/SAVE] button, and confirmation tone is heard.
To De-subscribe locally in the wireless terminal
At the Wireless Terminal
Menu (
BASE to erase + R/C for longer than 1 second + OK (
1)
Press Menu (
2)
Main Menu is displayed on the LCD.
3)
Select Phone Register menu by pressing Navigation (
button.
4)
Phone Register menu is displayed on the LCD.
5)
Select "Subscription" by pressing UP/ DOWN(
6)
Select BASE number to erase and press R/C (
7)
If you sure to erase, press OK (
8)
If local desubscription is completed, phone goes to previous menu.
) + Select Phone Register menu + Select Subscription + Select
) button.
) button.
64
HOLD/SAVE
HOLD/SAVE
)
) button and OK (
) button and OK (
) button.
) button for longer than 1 second.
)
Advertisement
Table of Contents
