Table of Contents
Advertisement
9. Installation of Wireless Terminal
9.2 Subscription
This procedure is for subscribing the wireless terminal to ipLDK-24/100/300/300E WOTS system.
To subscribe GDC-400H, you should follow two steps. The First step is making the system be in
subscription enabled state. While the system is in subscription enabled state, you should second
step. The second step is making GDC-400H to try to subscribe onto the system.
At the Attendant Station
+ 0# +
TRANS/PGM
1)
Press [TRAS/PGM] button. ([TRANS/PGM] LED flashes, and [MON] LED lights
steady.)
2)
Press '0#'
3)
Press Flexible button 1.
4)
Enter the station number.
5)
Enter the phone type.
System
ipLDK-24
ipLDK-100/300/300E
6)
Press [HOLD/SAVE] button and confirmation tone is heard.
Caution
Don't press [MON] button until subscription procedure at the wireless terminal is finished
and subscription confirmation tone is heard.
Flex. Button 1 +
Station No. +
Phone Type
Press '3' button
Below 1.0Ba MPB s/w version or below 1.0G
Press '1' button
WTIB s/w version.
Above 1.0Ba MPB s/w version and 1.0G WTIB
Press '3' button
s/w version
61
Phone Type +
Supported Software Version
HOLD/SAVE
Advertisement
Table of Contents
