Table of Contents
Advertisement
7.Key System Functions
7.18 Station Program Recovery
This function is to recover the previously programmed data. It will be certified by LCD display.
The followings are programmed data to be recovered.
Station number.
Idle LCD message.
Message icon.
FORWARD message format.
DND message format.
1)
Press TALK (
2)
Press PROGRAM (
Press
will be displayed on the LCD.
FORWARD and DND message format will be displayed on the LCD, if programmed.
The wireless terminal may be changed in the following situation after the above procedure.
1)
When board configuration is changed.
2)
When numbering plan is changed at ADMIN 01.
(ipLDK-24/100/300/300E : ADMIN 104)
7.19 Pre-selected Messages
A user can select a pre-assigned message to be displayed on the LCD of the calling terminal.
1)
Press TALK (
2)
Press PROGRAM (
3)
Press
.
4)
Dial the number of desired message. Date, time or station number if required. (See the
below table.)
5)
Press PROGRAM (
heard.)
No.
0 0
User Custom Message (See Programming User Custom Message)
0 1
LUNCH TILL / hh:mm
VACATION / mm dd
0 2
0 3
OUT OFFICE TILL / hh:mm
0 4
OUT OFFICE / mm dd
0 5
OUT OFFICE UNKNOWN
0 6
T) (Telephone No. up to 17 digits)
0 7
IN OFFICE / STA xxx
0 8
MEETING / TILL hh:mm
0 9
AT HOME
1 0
AT BRANCH / OFFICE
#
Cancel code
Are used for customized messages which are programmed by an attendant.
1 1~2 0
(See "Creating Customized Messages")
) button.
) button longer than 1 second.
- Confirmation tone will be heard. - Station number and idle message
) button.
) button longer than 1 second.
) button longer than 1 second. (Confirmation tone will be
Description
56
Advertisement
Table of Contents
