NordicTrack Cx 1055 Elliptical Exerciser User Manual page 17

HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of a long 1/8" to RCA stereo audio
cable (available at electronics stores) into either
jack on the console. Plug the other end of the cable
into the LINE OUT jack on your stereo. Note: While
the cable is plugged into the LINE OUT jack, do not
plug your headphones into the other jack on the
console.
A
Audio Cable
B. Plug one end of a long 1/8" to RCA stereo audio
cable (available at electronics stores) into either jack
on the console. Plug the other end of the cable into
an RCA Y-adapter (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the wire
into the unused side of the Y-adapter. Plug the Y-
adapter into the LINE OUT jack on your stereo.
Note: While the Y-adapter is plugged into the LINE
OUT jack, do not plug your headphones into the
other jack on the console.
B
Audio
Cable
Wire removed from
LINE OUT jack
HOW TO CONNECT YOUR COMPUTER
A. Plug one end of a long 1/8" to 1/8" stereo audio
CD
VCR
Amp
LINE OUT
LINE OUT
CD
VCR
Amp
LINE OUT
RCA
Y-adapter
17
cable (available at electronics stores) into either
jack on the console. Plug the other end of the cable
into the LINE OUT jack on your computer. Note:
While the cable is plugged into the LINE OUT jack,
do not plug your headphones into the other jack on
the console.
A
LINE OUT
Audio Cable