Table of Contents
Advertisement
The following table describes the parameters of this page:
Field
Quality of Service
IP Version
QoS
Summary
Rule
Rule Index
Active
Destination
IPv6
Source IPv6
DSCP Range
DSCP
Remarking
Queue #
Select IP version. In this example, the IP version is set to
IPv6.
Select Activated or Deactivated. After activating QoS, you
may set the upload bandwidth of the WAN interface.
Click the QoS Settings Summary button to view the table
of Qos rules and actions.
You may establish up to 16 QoS rules.
You may select Activated or Deactivated. Activated must
be selected to set QoS rules.
The Destination MAC address of the rule. If data packets
include the MAC address, the data packets are placed into
the group.
The Source MAC address of the rule. If data packets include
the MAC address, the data packets are placed into the
group.
DSCP Range is from 0 to 63.
For a message matching the QoS rule, its DSCP value will
be modified.
Select Low, Medium, High or Highest.
Description
73
Advertisement
Table of Contents
