Edimax AR-7182WnA User Manual page 59

Field
Physical Ports
DNS Relay
Primary DNS
Server
Secondary
DNS Server
Radvd Enable
Radvd Mode
Auto Prefix
RA Flag Set
DHCP6 Server
DHCP6 Mode
Dynamic Host Configuration Protocol (DHCP) allows the individual PC to
obtain the TCP/IP configuration from the centralized DHCP server. You can
configure this router as a DHCP server or disable it. The DHCP server can
assign IP address, IP default gateway and DNS server to DHCP clients. This
router can also act as a surrogate DHCP server (DHCP proxy) where it relays
IP address assignment from an actual DHCP server to clients. You can enable
or disable DHCP server or DHCP proxy.
When no port is selected, the LAN PC can't get an IP
from the router.
You can choose Use Auto Discovered DNS Server Only
or Use User Discovered DNS Server Only. If you select
Auto Discovered, the router accepts the firstly-received
DNS assignment from one of the PPPoA, PPPoE or MER
enabled PVC(s) during the connection establishment. If
select User Discovered, enter the IP addresses of the
primary and secondary DNS servers.
DNS server FOR wan and LAN
DNS server FOR wan and LAN
You may choose to enable or disable Radvd. The Router
Advertisement Daemon (Radvd) is an open-source
software product that implements link-local
advertisements of IPv6 router addresses and IPv6
routing prefixes using the Neighbor Discovery Protocol
(NDP).
You may choose Auto or Manual.
Select Enable or Disable.
You may choose ManagedAddr or Other Config.
You may choose to enable or disable DHCP6 Server.
You may choose Auto or Manual for the DHCP6 Server.
Description
59