Starting And Warming Up A Cold Engine [Tt-R90E(W)]; Starting A Warm Engine - Yamaha TT-R90(W) Owner's Manual

Starting and warming up a
cold engine [TT-R90E(W)]
1. Turn the fuel cock lever to "ON".
2. Turn the key to "ON" and make
sure that the engine stop switch is
set to " ".
3. Shift the transmission into the neu-
tral position.
WARNING
G
Be sure to shift the transmis-
sion into neutral before starting
the engine.
G Never ride with the sidestand
down.
4. Turn the starter (choke) on and
completely close the throttle. (See
page 3-6.)
5. Start the engine by pushing the
start switch.
6. After starting the engine, move the
starter (choke) back halfway.
OPERATION AND IMPORTANT RIDING POINTS
EAU40090
CAUTION:
For maximum engine life, always
warm the engine up before starting
off. Never accelerate hard when the
engine is cold!
7. When the engine is warm, turn the
starter (choke) off.
EWA14410
NOTE:
The engine is warm when it responds
normally to the throttle with the starter
(choke) turned off.
ECA11130

Starting a warm engine

Follow the same procedure as for start-
ing a cold engine with the exception
that the starter (choke) is not required
when the engine is warm.
5-2
EAU16640
5