Yamaha YZ125(P)/LC Owner's Service Manual page 446

HANDLEBAR
2. Install:
9
Grip cap (upper) 1
9
Grip cap (lower) 2
9
Bolt (grip cap) 3
NOTE:
Temporarily tighten the bolts (grip cap).
EC5B5210
Handlebar
1. Install:
9
Handlebar 1
9
Handlebar holder 2
9
Bolt (handlebar holder) 3
NOTE:
9
The upper handlebar holder should be
installed with the punched mark a forward.
9
First tighten the bolts on the front side of the
handlebar holder, and then tighten the bolts on
the rear side.
2. Install:
9
Grip (left) 1
Apply the adhesive to the handlebar 2.
NOTE:
9
Before applying the adhesive, wipe off grease
or oil on the handlebar surface a with a lac-
quer thinner.
9
Install the grip (left) to the handlebar so that
the line b between the two arrow marks faces
straight upward.
3. Install:
9
Collar 1
9
Cap cover 2
9
Throttle 3
NOTE:
9
Apply the lithium soap base grease on the
throttle grip sliding surface.
9
Tighten the grip cap bolts temporarily without
the throttle being fixed to the handlebar.
5-43
CHAS
28 Nm (2.8 m•kg, 20 ft•lb)