Kärcher HD 801 B Cage Manual page 20

Never direct the water jet on to persons,
–
animals, the appliance itself or electrical
components.
Vehicle tyres/ tyre valves may be
–
cleaned only with a minimum spray dis-
tance of 30 cm.
Otherwise, the high pressure spray can
cause damage to the vehicle tyre/ tyre
valve. The discolouring of the tyre is the
fhe first sign of damage. Damaged ve-
hicle tyres are a source of danger.
Do not spray materials contains asbes-
–
tos or other health-hazardous sub-
stances.
The operator must wear proper safety gear
–
to be protected against the water sprays.
Pay attention to ensure that all screws of all
–
connecting hoses are tightened properly.
The lever of the hand spray gun must not
–
be locked during the operation.
Do not spray flammable liquids.
–
Turning on the Appliance
 Open the water supply.
 Start the engine according to the oper-
ating instructions of the engine manu-
facturer.
 Press the lever on the hand spray gun.
Triple nozzle
HD 801 B Cage
Select round or flat spray by turning the
casing:
 Close the hand spray gun.
 Turn the casing to select the desired
spray type.
High pressure circular spray
(0°) for specially stubborn dirt
Flat low pressure spray
(CHEM) for operating using
detergents or cleaning at low
pressure.
High pressure flat spray (25°)
for large dirt areas
20
HD 1050 B Cage, HD 1050 DE Cage
 Close the hand spray gun.
 Turn the casing of the nozzle till the de-
sired symbol matches the marking.
 Select round or flat spray using touch-
less switching:
Turn the spray-pipe that is inclined
about 45° downward to the left or the
right.
Note
To prevent damage due to too much pres-
sure, always position high pressure ray first
from a greater distance towards object to
be cleaned.
Set working pressure and flow rate
HD 801 B Cage
Water pressure and quantity are perma-
nently set on this appliance and cannot be
changed.
HD 1050 B Cage, HD 1050 DE Cage
This appliance is equipped with a Servo-
press device. Working pressure and deliv-
ery rate can be continuously adjusted on
the adjustment wheel of the hand spray
gun.
– 5
EN
High pressure flat spray
(25°) for large dirt areas
High pressure circular spray
(0°) for specially stubborn
dirt
Flat low pressure spray
(CHEM) for operating using
detergents or cleaning at
low pressure.