GE Spacemaker JVM139K Use And Care Manual page 38

PROBLEM
OVEN WILL NOT COME
ON
CONTROL PANEL
LIGHTED, YET OVEN
WILL
NOT START
FOODS ARE EITHER
OVERCOOKED OR
UNDERCOOKED
ON DISPLAY
FLOOR OF THE
OVEN IS WARM,
EVEN WHEN THE
OVEN HAS NOT
BEEN USED
Steam or vapor escaping from
around the door.
Light reflection around door or
outer case,
If you need more help...call, toll free: GE Answer Center
38
QUESTIONS?
USE THIS PROBLEM SOLVER
POSSIBLE CAUSE
fuse in your home may be blown or the circuit breaker tripped. Replace fuse
A
or reset circuit breaker.
Unplug
your microwave oven, then plug it back in.
Door not securely closed.
Another selection entered already in oven and CLEAWOFF pad not touched
to cancel it.
Make sure you have entered cooking time after touching TIME COOK I & 11
pad.
START pad.
Make sure you have entered a temperature after touching TEMP COO~OLD pad.
Cooking times may vary because of starting food temperature, food density or
amount of foods in oven. Touch TIME COOK I & 11 pad and additional cooking
time for completion.
Incorrect power level entered. Check Cooking Guide for recommended
power level.
Dish was not rotated, turned or stirred. Some dishes require specific
instructions. Check Cooking Guide or recipe for instructions.
Too many dishes in oven at same time. Cooking time must be increased when
cooking more than one food item. Check Cooking Guide time recommendations.
Auto Roast function. Check Cooking Guide for specific instructions.
Probe has been forgotten or not seated properly in oven wall when using Temp
is on, the heat it produces makes the oven floor get warm. This is normal.
All these things are normal with your microwave oven:
Dimming oven light and change
in blower sound may occur while
operating at power levels other
than high.
is operating.
Some TV-Radio interference
might be noticed while using your
microwave oven. It's similar to the
interference caused by other small
appliances and does not indicate a
problem with your oven.
@
/ 800.626.2000/ consumer information service