GE Spacemaker JVM139K Use And Care Manual page 20

Auto Roast uses the temperature probe to cook to
the desired serving temperature. Unlike Temp
Roast uses up to 3 power settings which
automatically switch during roasting, thus
providing even, tender cooking results without
overcooking.
Preparing Roasts for Auto Roasting
Place tender beef
roast in cooking
bag on trivet in
microwave-safe
dish. (Refer to
package instructions
for proper use of
cooking bag. ) Insert
probe through cooking bag horizontally into the
center meaty area not touching bone or fat. Make
sure the handle does not touch the food or top or sides
of the oven.
How to Roast Beef to Medium
1. Touch AUTO ROAST pad.
AUTO ROAST Touch number pad 1. Touch
START. (See the "Auto Roast
Guide" for complete list of
recommended codes. )
NOTE: By touching
the AUTO ROAST pad
during cooking the
temperature will be
displayed. ("COOL"
is released, doneness code reappears on the display.
2. When you select Auto
Roast codes I or 2, the
oven signals with 4 beeps
and "TURn" flashes on
the display when it's time
to turn the roast over.
After you turn the roast, close the door and touch
START. (NOTE: Oven continues to cook after the
signal whether or not roast is turned over. )
20
Just as in conventional roasting, only tender roasts
should be roasted until specified internal temperatures
are reached. Less tender roasts should be microwaved
by time, according to the cookbook that comes with
your oven.
Place pork roast
in cooking bag
and place in
microwave-safe
dish.
Place meat in
oven with probe
to the right. Insert
cable end of probe
firmly into
receptacle on
oven wall.
3. After a
pre-programmed
food temperature is
reached, oven beeps
4 times and "HOLd"
appears on the display.
4. Food will be held at
this temperature for
60 minutes. The oven
then beeps 4 times and
"End" appears.