Special Mode Adjustment - Sharp XG-NV6XM Operation Manual

Computer Image Adjustments
Projector
1, 6
2, 3, 4
5
(GUI) On-screen Display
Remote control

Special Mode Adjustment

Ordinarily, the type of input signal is detected and the
correct resolution mode is automatically selected.
However, for some signals, "Special Modes" on the "Fine
Sync" menu screen may need to be changed to match
the computer display mode.
• Avoid displaying computer patterns which repeat every
• When inputting DTV 480P signals, select "480P" in step
(Slide the MOUSE/ADJUSTMENT switch on
the remote control to the ADJ. position.)
1 Press MENU.
2 Press ß/© to select "Fine Sync".
3 Press ∂/ƒ to select "Special Modes".
4 Press ∂/ƒ to select the optimal resolution mode.
5 Press ENTER to save the setting.
6 To exit from the GUI, press MENU.
other line (horizontal stripes). (Flickering may occur, making
the image hard to see.)
above.
MOUSE ADJ.
4
32