Product Hardware Features - TRENDnet TEW-813DRU User Manual

TRENDnet User's Guide
Performance
Next Generation Wireless AC
802.11ac provides uninterrupted HD video streaming in a busy connected home
Simultaneous Dual Band
High speed 867 Mbps Wireless AC + 300 Mbps Wireless N
Gigabit Ports
Gigabit ports extend high performance wired connections
Wireless Coverage
Extensive wireless coverage with MIMO antenna technology
Backward Compatible
Compatible with legacy wireless devices
Targeted Beamforming
Increased real-time performance by directing stronger wireless to your specific location
*For maximum performance of up to 867 Mbps use with an 867 Mbps 802.11ac wireless
adapter.
**Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions.
© Copyright 2014 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
WPS Button
Gigabit LAN Ports
1-4
Internet Port
Power Port
USB 2.0 – Connect USB storage devices to share over the network via FTP or Windows®
SMB/CIFS, Samba.
WPS Button (Wi-Fi Protected Setup) – Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
LAN Ports 1-4 – Connect Ethernet cables (also called network cables) from your router
LAN ports to your wired network devices.
Internet Port – Connect an Ethernet cable from your router Internet port to your
modem.
Power Port – Connect the included power adapter from your router power port and to
an available power outlet.
On/Off Power Switch – Push the router On/Off power switch to turn your router "On"
(Inner position) or "Off" (Outer position).
Reset Button – Press and hold this button for 10 seconds to reset the router.
TEW-813DRU
USB 2.0 Port
On/Off Power Switch
Reset Button (Bottom)
2