Checking The Spark Plug - Yamaha PW50(Z) Owner's Manual

Checking the spark plug

The spark plug is an important engine
component, which is easy to check.
Since heat and deposits will cause any
spark plug to slowly erode, the spark
plug should be removed and checked
in accordance with the periodic mainte-
nance and lubrication chart. In addition,
the condition of the spark plug can re-
veal the condition of the engine.
To remove the spark plug
1. Remove the spark plug cap.
1
1. Spark plug cap
2. Remove the spark plug as shown,
with the spark plug wrench includ-
ed in the owner's tool kit.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU19603
1
1. Spark plug wrench
To check the spark plug
1. Check that the porcelain insulator
around the center electrode of the
spark plug is a medium-to-light tan
(the ideal color when the vehicle is
ridden normally).
TIP
If the spark plug shows a distinctly dif-
ferent color, the engine could be oper-
ating improperly. Do not attempt to
diagnose such problems yourself. In-
stead, have a Yamaha dealer check
the vehicle.
2. Check the spark plug for electrode
erosion and excessive carbon or
Specified spark plug:
To install the spark plug
1. Measure the spark plug gap with a
1. Spark plug gap
Spark plug gap:
7-5
other deposits, and replace it if
necessary.
PW50 NGK/BPR4HS
PW50Z NGK/BPR4HS
DENSO/W14FPL
wire thickness gauge and, if nec-
essary, adjust the gap to specifica-
tion.
1
0.6–0.7 mm (0.024–0.028 in)
2
3
4
5
6
7
8
9