Kickstarter
1
1. Kickstarter lever
If the engine fails to start by pushing the
start switch, try to start it by using the
kickstarter. To start the engine, fold out
the kickstarter lever, move it down light-
ly with your foot until the gears engage,
and then push it down smoothly but
forcefully.
INSTRUMENT AND CONTROL FUNCTIONS
EAU37650
Seat
To remove the seat
Remove the bolts, and then slide the
seat to the rear and pull upward.
1
1. Bolt
To install the seat
1. Fit the slot in the seat onto the pro-
jection on the fuel tank, and insert
the projection on the seat into the
seat holder as shown.
EAU46282
2
1. Slot
2. Projection
3. Seat holder
2. Place the seat in the original posi-
TIP
Make sure that the seat is properly se-
cured before riding.
4-8
1
2
3
tion, and then tighten the bolts.
4