Placing The Ups In Configure Mode - HP R1500 - UPS XR User Manual

This chapter contains information on configuring the UPS. Proper configuration of the UPS is
important in performing other functions on the unit, such as maintaining the battery and
troubleshooting alarms.

Placing the UPS in Configure Mode

The UPS can enter Configure mode while in Operate or Standby mode. To place the UPS in
Configure mode:
1. Remove the UPS front bezel by snapping it off (1).
Figure 3-1: Removing the UPS front bezel
HP Uninterruptible Power System R3000 XR Models User Guide
Configuration
1
3
3-1