GE Spacemaker JVM150K Use And Care & Cooking Manual page 22

Auto Cook Codes
Auto Cook codes 1 through 8
are designed to give you easy
automatic results with a number
of foods.
Code 1, designed for reheating
foods quickly, turns the oven off
automatically as soon as the sensor
detects steam from the foods.
Example:
Step 1: Place covered food in
AUTO COOK
oven. Touch AUTO COOK pad.
"ENTER COOK CODE"
flashes on display.
Step
for desired code. "CODE 2"
shows. After 4 seconds,
"START" flashes on
display. Touch START.
How to Adjust Auto Cook Codes to Suit Your Taste
By simply adding a 1 after any Auto Cook code
number, you can set the oven to cook for 20q0 less
time than the code would regularly provide.
For example, if code 4 cooks your chicken more done
than you like it, set code 41 next time and you'll get
Example:
Step 1: Touch AUTO COOK
AUTO COOK
pad.
Step
and 1 in that order. "AUTO
CODE 4" shows and after 4
seconds "START" flashes on
display.
22
AUTO COOK
When codes 2 through 8 are
selected, the oven determines how
much additional cooking time is
needed after steam has been
sensed, automatically switches to
TIME COOK and signals. The word
"AUTO" on the display is then
replaced by countdown numbers
indicating remaining cooking time.
When the signal is heard, the oven
door may be opened for stirring,
turning or rotating food.
2: Touch number pad
2: Touch number pads 4
(continued)
on display, indicating
OPENING DOOR MAi
AFFECT COOKING
PERFORMANCE.
Beep sounds when
time. Kotate or stir
cook
food, if necessary. When
done, oven beeps every
minute until door is opened or CLEAWOFF is touched.
If you want a longer cooking time than a code
provides, add a 9 after the code.
For the chicken in the example at left, code 49 would
provide 20% longer cooking time than the regular
code 4 would provide.
START
A guide behind the oven door lists
cooking codes for frequently
prepared fresh or uncooked foods
and appropriate codes are
recommended in the cooking guide
in the Automatic Cooking section.
COOK
Step 3: Touch START.
"AUTO" shows on display.
DO NOT OPEN DOOR until
first oven signal, then rotate
dish 1/2 turn if necessary. Close
door and touch START to finish
cooking.