HOW TO USE THE M~UTE/SECO~ TMER
The Minute/Second Timer
The Minute/Second Timer has 3 timing functions:
It operates as a minute timer.
It can be set to delay cooking.
It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without
microwave energy.
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step 2: Touch number pad 3 and MINUTE pad
(for 3 minutes and no seconds).
Step 3: Touch START. Display shows time counting
down. The timer signals when time is up.
How to Defrost, Hold and Time Cook
Let's say you want to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook
for 25 minutes. Here's how to do it:
Step 1: Take casserole from freezer and place in oven.
Step 2: Touch TIME
DEFROST pad.
TIME
DEFROST
Step 3: Touch pads 1,5 and
MINUTE for 15 minutes
MINUTE
defrosting time. (Defrosting
is automatically set on Power
level 3 but can-be chanied by
touching the POWER ~EVE-L
pad and the desired power
level.)
10
Using a Holding Time
The Minute/Second Timer can also be used to
program a "holding time" between microwave
cooking functions. The time can range from 1 second
to 99 minutes and 99 seconds. A holding or standing
time may be found in some of your own-recipes or ~n
a cookbook.
Programming Delayed Cooking
To delay cooking
to 99 minutes and 99 seconds,
up
touch e[ther TIM-E COOK I & II, TEMP COO~OLD
or AUTO ROAST and enter cook time, temperature
or code. Touch MIN/SEC TIMER and enter number
of minutes to delay cooking. When delaying Temp
is in food. Touch START. Timer w~l count do-wn to
O and cooking will begin.
time by touching Td-IN/SEC
Step 5: Touch 1,0 and MINUTE to hold for 10
minutes.
Step 6: Touch TIME
COOK I &II pad.
TIME COOK
I &II
Step 7: Touch 2, 5 and MINUTE for 25 minutes of
Step 8: Touch START. As each
function is automatically
START
performed, oven display shows
instructions entered and the
function. When time is up, the
oven signals and flashes "End."
Need help?
Do you have a question about the Spacemaker JVM150K and is the answer not in the manual?
Questions and answers