GE Spacemaker JVM150K Use And Care & Cooking Manual page 18

Auto Roast uses the temperature probe to cook
to the desired serving temperature. Unlike Temp
Auto Roast uses up to 3 power settings which
automatically switch during roasting, thus
providing even, tender cooking results without
overcooking.
Preparing Roasts for Auto Roasting
Place tender beef
roast in cooking
bag on trivet in
microwave-safe
dish. (Refer to
package instructions
for proper use of
cooking bag. ) Insert
probe through cooking bag horizontally into the
center meaty area not touching bone or fat. Make
sure the handle does not touch the food or top or
sides of the oven.
How to Roast Beef to Medium
Step 1: Touch AUTO ROAST
pad. Touch number pad 1.
Touch START. (See the "Auto
Roast Guide" for complete list
of recommended codes.)
NOTE: By touching
the AUTO ROAST pad
during cooking, the
meat's internal
temperature will be
displayed. ("COOL" will
be displayed until meat reaches 90°F.) When pad is
released, doneness code reappears on the display.
Step 2: When you select
the oven signals with 4
beeps and "TURn'7
flashes on the display
when it's time to turn the
roast over. After you turn the roast, close the door and
touch START. (NOTE: Oven continues to cook after
the signal whether or not roast is turned over.)
18
FOOD TEMP
Just as in regular roasting, only tender roasts should
be roasted until specified internal temperatures are
reached. Less tender roasts should be microwaved
by time.
Place pork roast
in cooking bag
and place in
microwave-safe
dish.
Place meat in
oven with probe
to the right. Insert
cable end of probe
firmly into
receptacle on
oven wall.
Step 3: After a
4 times and "HOLd'7
appears on the display.
Step 4: Food will be
held at this temperature
for 60 minutes. The
oven then beeps 4 times
and "End" appears.