Clock And Timer; Controls - GE JKS0627 Owner's Manual

Using the oven controls.
Throughout this manual, features and appearance may vary from your model.
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Press this pad to select the bake function.
Display
Shows the time of day, oven temperature,
whether the oven is in the bake or broil
mode and the times set for the timer or
automatic oven operations.
If "F — and a number or letter" flash in the display
and the oven control signals, this indicates a
function error code. Press the CLEAR/OFF pad. Allow
the oven to cool for one hour. Put the oven back into
operation. If the function error code repeats, disconnect
the power to the oven and call for service.
If your oven was set for a timed oven operation and a
power outage occurred, the clock and all programmed
functions must be reset.
The time of day will flash in the display when there
has been a power outage.
START Pad
Must be pressed to start any cooking
function.
COOKING TIME Pad
Press this pad and then press the HOUR and
MIN + or – pads to set the amount of time
you want your food to cook. The oven will
shut off automatically when the cooking
time has run out, unless the Cook and
Hold feature was set.
www.GEAppliances.com
DELAY START Pad
Use along with COOKING TIME pad to set
the oven to start and stop automatically at
a time you set.
CLOCK Pad
Press this pad before setting the clock.
KITCHEN TIMER ON/OFF Pad
Press this pad to select the timer feature.
CLEAR/OFF Pad
Press this pad to cancel ALL oven
operations except the clock and timer.
HOUR and MIN + and – Pads
Press these pads to set times up to 9 hours
and 59 minutes—for example, the time of
day on the clock, the timer, the starting
and length of cooking time for timed bake.
TEMP + and – Pads
Press these pads to set the cooking
temperature you want to use.
OVEN LIGHT ON/OFF Pad
Press this pad to turn the oven light on
or off.
BROIL HI/LO Pad
Press this pad to select the broil function.
5